Honda ACCORD 2020 Owner's Manual page 682

uuJump StartinguJump Starting Procedure
■
What to Do After the Engine Starts
Once your vehicle's engine has started, remove the jumper cables in the following
order.
1. Disconnect the jumper cable from your vehicle's ground.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
* Not available on all models
680
1What to Do After the Engine Starts
The Vehicle Stability Assist TM (VSA®) system, Vehicle
Stability Assist TM (VSA®) OFF, adaptive cruise control
(ACC) with Low Speed Follow * , adaptive cruise
control (ACC) * , safety support and low tire pressure/
TPMS indicators may come on in amber along with a
message in the driver information interface when you
set the power mode to ON after reconnecting the
battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.