Honda ACCORD 2020 Owner's Manual page 482

uuWhen DrivinguShifting
■
If you want to keep the transmission in
With the engine running:
1. Press and hold the brake pedal.
2. Press and release the
N (Neutral) hold mode will appear on the driver information interface.
u (
3. Press the ( N button again and hold it for two seconds.
u The vehicle will enter car wash mode, which must be used when your vehicle
is pulled through a conveyor type automatic car wash where you or an
attendant do not remain in the vehicle.
480
( N position [car wash mode]
N button.
(
If the ENGINE STOP/START button is pressed
after car wash mode has been activated, the
power mode will change to ACCESSORY and
a message will be displayed on the driver
information interface.
For 15 minutes the transmission remains
u
in ( N with the power mode will remain
in ACCESSORY. After that, the
transmission automatically changes to
( P and the power mode changes to OFF.
u Manually changing to
ACCESSORY mode. The
comes on and the power mode changes
to OFF. You must always put the
transmission into
mode is no longer needed.
1If you want to keep the transmission in
mode]
NOTICE
When transmission is too hot, carwash mode may
not be available. Let the engine idle and cool down
transmission.
To keep the vehicle in
follow this procedure:
While the power mode is on, select
within five seconds, press the ENGINE STOP/START
P cancels
(
button.
( P indicator
Note that the transmission may not stay in
position while any of the following indicators is on:
•
( P when car wash
•
•
N (
position, you can also
( N
Transmission system indicator.
Malfunction indicator lamp.
Charging system indicator.
position [car wash
, and then
N (
( N