Indicator
Name
Safety Support
Indicator
(Amber)
* Not available on all models
On/Blinking
Comes on when RDM and/or
●
CMBS
TM
shuts itself off.
Models with the blind spot
information system
Comes on when mud, snow, or ice
●
has accumulated in the vicinity of
the blind spot information system
sensor.
Indicator may come on temporarily
●
when the Maximum Load Limit is
exceeded.
Explanation
Stays on - The area around the camera is
●
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
●
Have your vehicle checked by a dealer if
the indicator and message are still
displayed even after you have cleaned the
area around the camera.
2 Front Sensor Camera P. 572
Comes on while driving - Something
●
may be interfering with the blind spot
information system sensor. Check the
vicinity of the blind spot information
system sensor and remove any obstacles.
2 Blind spot information System
P. 505
Make sure the total load is within the
●
Maximum Load Limit.
2 Maximum Load Limit P. 459
uuIndicatorsu
Message
*
—
Continued
103