Honda ACCORD 2020 Owner's Manual page 120

uuIndicatorsuDriver Information Interface Warning and Information Messages
Automatic transmission models
Message
• Appears when you try to change the gear position
• Appears when the
• Appears if you put the transmission into
• Appears when you set the power mode to ON
• Appears when you change the gear position after
• Appears when you try to change the gear position
118
Condition
without releasing your foot off the accelerator pedal.
P button is pressed while the (
vehicle is moving.
the vehicle is moving forward, or into
vehicle is reversing.
without fastening the driver's seat belt.
( P has been automatically selected with the driver's
door open, the driver's seat belt unfastened, then
the brake pedal is released.
without depressing the brake pedal.
• Release your foot off the accelerator pedal, then select
a shift button.
• Make sure that the vehicle comes to a stop before
operating the select button.
( R while
D while the
(
• Fasten the seat belt properly before you start to drive.
2 Shift Operation P. 478
• Depress the brake pedal, then select a shift button.
Explanation