Panasonic KX-TVM50 Installation Manual page 87

Windows Me
1.
Connect the PC to the PBX with a USB cable.
The Add New Hardware Wizard will appear.
2.
Select Specify the location of the driver [Advanced], then click Next.
3.
Select Search for the best driver for your device. [Recommended].
4.
Select Specify a location, then click Browse.
5.
Specify the folder containing the USB driver, CD-ROM Drive:\USB driver\WinMe, then click OK.
6.
Click Next.
7.
Click Next.
8.
Click Finish.
Note
If a dialogue box appears asking you to restart your PC, restart the PC.
Windows 2000
1.
Connect the PC to the PBX with a USB cable.
The Found New Hardware Wizard will appear.
2.
Click Next.
3.
Select Search for a suitable driver for my device. [Recommended], then click Next.
4.
Select Specify a location, then click Next.
5.
Click Browse, and specify the folder containing the USB driver, CD-ROM Drive:\USB
driver\Win2000, then click Open.
6.
Click OK.
7.
Click Next.
8.
Click Finish.
Windows XP
1.
Connect the PC to the PBX with a USB cable.
The Found New Hardware Wizard will appear.
2.
Select Install from a list or specific location [Advanced], then click Next.
3.
Select Search for the best driver in these locations.
4.
Select Include this location in the search:, then click Browse.
5.
Specify the folder containing the USB driver, CD-ROM Drive:\USB driver\WinXP, then click OK.
6.
Click Next.
7.
Click Continue Anyway.
8.
Click Finish.
3.2 KX-TVM/NCV Maintenance Console Installation
Installation Manual 87