Honeywell 50207 Manual page 10

13. Remove the canopy cover from the bottom of the
canopy (Fig. 13)
Helpful Hint: The downrod, hanging ball, and canopy
cover are not used in this type of installation.
14. Align the canopy with the closemount screw
holes in the top of the motor assembly. Secure
the canopy to the top of the motor assembly by
installing three closemount screws and spring
washers into the top of the motor housing (Fig. 14).
Closemount Screw
15. Raise the fan and place the canopy on the
mounting bracket hook for wiring (Fig. 15).
CLOSEMOUNT INSTRUCTIONS
Spring Washer
Fig. 13
Canopy
Cover
Fig. 14
Spring
Washer
Fig. 15
10
Closemount
Screws
Canopy
Canopy
Hook