Advertisement
uuIndicatorsu
Indicator
Name
Collision
Mitigation
Braking System
(CMBS
TM
)
Indicator
*
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
86
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
Comes on when you deactivate
●
the CMBS
TM
. A multi-information
display message appears for five
seconds.
Comes on if there is a problem
●
with the CMBS
TM
.
Comes on when the CMBS
●
system shuts itself off.
TM
Explanation
Stays on constantly without the
●
CMBS
TM
off - Have your vehicle checked by
a dealer.
2 Collision Mitigation Braking System
(CMBS
TM
)
*
P. 486
TM
Stays on - The area around the camera is
●
blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.
2 Front Sensor Camera
When the radar sensor gets dirty, stop your
●
vehicle in a safe place, and wipe off dirt
using a soft cloth.
Have your vehicle checked by a dealer if the
●
message does not disappear even after you
clean the sensor cover.
2 Collision Mitigation Braking System
(CMBS
TM
)
*
P. 486
Stays on - The temperature inside the
●
camera is too high. Use the climate control
system to cool down the camera. The
system activates when the temperature
inside the camera cools down.
2 Front Sensor Camera
Message
TM
*
P. 447
TM
*
P. 447
*
Advertisement
