Advertisement
Indicator
Name
Road Departure
Mitigation (RDM)
Indicator
*
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
*1
, then goes off.
(
w
Comes on if there is a problem with
●
the RDM system.
Comes on when the RDM system
●
shuts itself off.
Explanation
Stays on constantly - Have your vehicle
●
checked by a dealer.
Stays on - The temperature inside the
●
camera is too high.
Use the climate control system to cool
down the camera.
The system activates when the temperature
inside the camera cools down.
*
2 Front Sensor Camera
Stays on - The area around the camera is
●
blocked by dirt, mud, etc. Stop your vehicle
in a safe place, and wipe it off with a soft
cloth.
Have your vehicle checked by a dealer if the
●
indicator and message come back on after
you cleaned the area around the camera.
2 Front Sensor Camera
*
uuIndicatorsu
Message
P. 447
P. 447
Continued
*
83
Advertisement
