Honda Accord Sedan 2017 Owner's Manual page 540

uuReplacing Light BulbsuBrake Light, Rear Turn Signal Light and Rear Side Marker/Taillight Bulbs
Brake Light, Rear Turn Signal Light and Rear Side
Marker/Taillight Bulbs
When replacing, use the following bulbs.
Models with LED type brake lights
Brake Light: LED
Rear Turn Signal Light: 21 W (Amber)
Rear Side Marker/Taillight: LED
Models with bulb type brake lights
Brake Light: 21 W
Rear Turn Signal Light: 21 W (Amber)
Rear Side Marker/Taillight: LED
Holding Clip
Socket
Bulb
Bulb *
* Not available on all models
538
1. Remove the holding clips using a flat-tip
screwdriver, then pull the lining back.
2. Turn the socket counter-clockwise and
remove it.
3. Remove the old bulb and insert a new bulb.
Socket *
1Brake Light, Rear Turn Signal Light and Rear Side Marker/Taillight
Bulbs
Models with LED type brake lights
Brake and rear side marker/taillights are LED type.
Have an authorized Honda dealer inspect and replace
the light assembly.
Models with bulb type brake lights
Rear side marker/taillights are LED type. Have an
authorized Honda dealer inspect and replace the light
assembly.
All models
When removing the clip, insert a flat-tip screwdriver,
then lift and remove the clip.
Clip
Insert the clip with the pin raised, and push until it is flat.
Push until the
pin is flat.