Honda Accord Sedan 2017 Owner's Manual page 538

uuReplacing Light BulbsuFront Side Marker Light Bulbs
Models with LED headlights
Front Side Marker Light Bulbs
When replacing, use the following bulbs.
Front Side Marker Light: 3 CP
Holding Clip
Screw
Bulb
536
1. Turn the steering wheel all the way to the
opposite side from the light being replaced.
Passenger side: Turn the steering wheel
to the left.
Driver side: Turn the steering wheel to the
right.
2. Remove the holding clips and screw, and
pull the inner fender back.
3. Turn the socket counter-clockwise and
remove it.
4. Remove the old bulb and insert a new bulb.
Socket
1Front Side Marker Light Bulbs
Insert a flat-tip screwdriver, lift and remove the center
pin to remove the clip.
Center pin
Insert the clip with the center pin raised, and push
until it is flat.
Push until the
pin is flat.