Advertisement
uuChecking and Maintaining TiresuWear Indicators
Wear Indicators
Example of a Wear
Indicator mark
Tire Service Life
The life of your tires is dependent on many factors, including driving habits, road
conditions, vehicle loading, inflation pressure, maintenance history, speed, and
environmental conditions (even when the tires are not in use).
In addition to regular inspections and inflation pressure maintenance, it is
recommended that you have annual inspections performed once the tires reach five
years old. All tires, including the spare, should be removed from service after 10
years from the date of manufacture, regardless of their condition or state of wear.
548
The groove where the wear indicator is
located is 1/16 inch (1.6 mm) shallower than
elsewhere on the tire. If the tread has worn so
that the indicator is exposed, replace the tire.
Worn out tires have poor traction on wet
roads.
1Checking Tires
Models with 215/55R17 tires
Models with 235/40R19 tires
High speed driving
We recommend that you do not drive faster than the
posted speed limits and conditions allow. If you drive
at sustained high speeds (over 99 mph or 160 km/h),
adjust the cold tire pressures as shown below to
avoid excessive heat build up and sudden tire failure.
Models with 215/55R17 tires
Tire Size
215/55R17 94V
Pressure
Front: 35 psi (240 kPa, 2.4 kgf/cm
Rear: 35 psi (240 kPa, 2.4 kgf/cm
Models with 235/40R19 tires
Tire Size
235/40R19 96V
Pressure
Front: 36 psi (250 kPa, 2.5 kgf/cm
Rear: 35 psi (240 kPa, 2.4 kgf/cm
2
)
2
)
2
)
2
)
Advertisement
