Maintenance; Cleaning The Machine - Makita ADBU05 Instruction Manual

Hold the machine with both hands. While operating the
machine, adjust the switch trigger so that the suction
force is appropriate for the work location and conditions.
Fig.12
Empty the dust bag before it becomes too full by remov-
ing the dust bag from the machine, and then removing
the fastener.
Fig.13
► 1. Fastener
1
11 ENGLISH

MAINTENANCE

CAUTION:
Always be sure that the machine is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.

Cleaning the machine

Clean the machine by wiping off dust with a dry cloth or
one dipped in soapy water and wrung out.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
Remove dust or dirt from the suction inlets.
1
1
Fig.14
► 1. Suction inlet