Makita DCL283F Instruction Manual page 17

When the mesh filter gets dirty badly, clean it in the
following procedures.
1.
Turn the mesh filter in the direction of the arrow
and remove it while the hooks are unlocked.
Fig.41
► 1 . Mesh filter 2. Hook
2. Remove the dust on the mesh filter and then wash
it with water. After that, dry it thoroughly.
3.
Insert the mesh filter into the base while the hooks
are aligned with the port. Turn the mesh filter in the
direction of the arrow until the hooks are locked with a
click. Make sure that the mesh filter is installed securely.
Fig.42
► 1 . Mesh filter 2. Hook 3. Port
2
1
2
1
MAKITA LIMITED WARRANTY
Please refer to the annexed warranty sheet for the
most current warranty terms applicable to this product.
If annexed warranty sheet is not available, refer to the
warranty details set forth at below website for your
respective country.
United States of America: www.makitatools.com
Canada: www.makita.ca
Other countries: www.makita.com
3
17 ENGLISH