Table of Contents
Advertisement
1.800.561.8187
Cautions
•
The E3Point monitor must be installed only by trained personnel and service
engineers in accordance with local codes.
•
The safety of any system incorporating the E3Point monitor is the responsibility
of the assembler of the system.
•
Protect the monitor from water, wash-down, and excessive humidity.
•
To prevent electrical interference, keep the monitor and wire runs away from
mercury vapor lights, variable speed drives, and radio repeaters.
•
Protect the monitor from physical damage (fork lifts, etc.).
•
Do not mount the monitor over a door in a refrigerated area.
•
For critical locations, more than one monitor should be installed in each room.
•
Never mount the sensor flat on a ceiling.
•
Never mount the sensor on a vibrating surface.
E
Point Gas Monitor Technical Manual
3
www.
Warnings and Cautions
information@itm.com
.com
3
Advertisement
Table of Contents
