D-Link AirPro DWL-AB650 Manual page 16

Using the Configuration Utility
Status
1
2
3
4
5
6
If you enable WEP encryption or Turbo Mode make sure to enable WEP
encryption and Turbo Mode on all the devices in your network.
The Status screen displays the current properties of the DWL-AB650.
1 Connection Status-
2 Network Name-
3
Network Type-
4 WEP Status-
WEP stands for Wired Equivalent Privacy.
It is a security protocol for Wireless Local Area Networks
Speed-
5
6 Signal Strength-
MAC Address-
7
8 Radio Status-
Turbo Mode-
9
10 Click OK or Apply-
7
8
9
10
Indicates the connection status: either connected or
disconnected.
Displays the network name that you have input
Indicates either Infrastructure, Ad-Hoc or
Infrastructure and Ad-Hoc
Either Enable or Disable
Indicates data rate speed
Displays the signal strength
Media Access Control address is a unique hardware
address that identifies the DWL-AB650 on the network
ON or OFF
Enable or Disable. Disable is the default setting
Click Apply to save the changes
16