D-Link DWL-AG530 Quick Installation Manual
D-Link DWL-AG530 Quick Installation Manual

D-Link DWL-AG530 Quick Installation Manual

Air premier dualband wireless pci adapter
Hide thumbs Also See for DWL-AG530:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

This product works with the following
operating system software:
XP, Windows 2000, Windows
Me, Windows 98SE
Before You Begin
You must have at least the following:
A desktop computer with an available PCI 2.2, 32-bit, 5 volt PCI slot
At least a 500MHz processor and 128MB of memory
An 802.11a, 802.11b or 802.11g Access Point (for Infrastructure Mode) or
another 802.11a, 802.11b, or 802.11g wireless adapter (for Ad-Hoc;
Peer-to-Peer networking mode.)
Check Your Package Contents
These are the items included with your DWL-AG530 purchase:
If any of the above items are missing, please contact your reseller.
Insert the D-Link CD Into Your Desktop PC
Turn on the computer
Insert
the D- Link AirPremier DWL-AG530
Driver CD in the CD-ROM drive.
The step-by-step instructions that follow are shown in
Windows XP. The steps and screens are similar for
the other Windows operating systems
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
Windows
DWL-AG530 Dualband Wireless PCI Adapter
CD-ROM (containing Drivers, Manual and Warranty)
and
holders. Software and specifications subject to change without notice.
DWL-AG530
Wireless PCI Adapter
into your computer
before installing the
driver software from the
D-Link CD!
1
1
TM
Ai r Premi er Dualband
Wi reless PCI Adapt er
Do
NOT
install
the DWL-AG530

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DWL-AG530

  • Page 1 Windows XP. The steps and screens are similar for D-Link CD! the other Windows operating systems ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.
  • Page 2 Continued... The Install Screen will appear. Click Install Drivers If the CD Autorun function does not automatically start on your computer , go to Start > Run and type “D: \Drivers\Setup.exe.” If it does start, proceed to the next screen. Type “D:\Drivers\Setup.exe.”...
  • Page 3 Click Next Click Next Click Finish Shut down your computer...
  • Page 4 Make sure to turn off your computer and unplug the power cord before you begin. Remove the back or side cover of the computer. Carefully guide the DWL-AG530’s antenna through the PCI bracket opening adjacent to the PCI slot you intend to use for the DWL-AG530.
  • Page 5 Installing the DWL-AG520 Wireless PCI Adapter in Your Computer (cont.) Gently connect the antenna to the antenna stand. Finished! Antenna to wirelessly connect to 802.11a and 802.11b networks Screw Mount The screw that Link / Activity LEDs secures the Indicates that the card is adapter to the Antenna Cable —...
  • Page 6: Restart Your Computer

    Restart Your Computer When you restart your computer this Found New Hardware (Windows XP) screen Wizard will appear: Select Install the software automatically (Recommended) Click Next For Windows XP: This Hardware Installation alert screen may appear after the desktop computer restarts. Click Continue Anyway to finalize the installation...
  • Page 7 Microsoft certification is pending. Your Installation is Complete! After you’ve continued in Windows 2000, Me, or 98SE, the D-Link AirPremier DWL-AG530 Configuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this...
  • Page 8 Appendix For Windows XP, if you wish to use the AirPremier utility, please do the following steps. Click the XP Networking icon to use the Zero Configuration Wireless Settings. Click Advanced Uncheck “Use Windows to configure my wireless net- work settings.”...
  • Page 9: Using The Configuration Utility

    AG530 wireless connection to the access point. The by the DWL-AG530 Signal Strength represents the wireless signal be- depending on the tween the access point and the DWL-AG530. The distance from the access percentage coincides with the graphical bar. point.
  • Page 10 SSID: The Service Set Identifier is the name as- Wireless Mode: signed to the wireless Data Encryption: The factory setting is network. The factory SSID default setting is set to set to Infrastructure. setting is set to default. Make Disabled. The adapter Ad-Hoc mode is used changes here to match the supports WEP and AES...
  • Page 11: Technical Support

    Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
  • Page 12: Bevor Sie Anfangen

    Windows XP. Alle Arbeitsschritte und von der D-Link-CD Anzeigen sind in ähnlicher Form auch unter den installiert wurde! anderen Windows-Betriebssystemen vorhanden. ©2003 D-Link Systems, Inc. Alle Rechte vorbehalten. Warenzeichen oder eingetragene Warenzeichen sind Eigentum der entsprechenden Inhaber. Änderungen an Software und Spezifikationen vorbehalten.
  • Page 13 Fortsetzung… Nun wird der Installationsbildschirm angezeigt. Klicken Sie auf Install Drivers Wird die CD nicht automatisch gestartet, gehen Sie zu Start > Ausführen und geben Sie „D: \Drivers\Setup.exe“ ein. Wenn die CD danach startet, gehen Sie weiter zum nächsten Bildschirm. Geben Sie “D:\Drivers\ Setup.exe”...
  • Page 14 Klicken Sie auf Next Klicken Sie auf Next Klicken Sie auf Finish Fahren Sie den Computer...
  • Page 15 Fahren Sie Ihren Rechner herunter und ziehen Sie das Stromkabel ab, bevor Sie anfangen. Entfernen Sie die Rück- bzw. Seitenabdeckung Ihres Rechners. Ziehen Sie die Antenne des DWL-AG530-Adapters vorsichtig durch die Öffnung des PCI-Slots, in dem Sie den Wireless Adapter einsetzen. Schieben Sie den DWL-AG530- Adapter vorsichtig in einen freien PCI- Slot (dieser ist in der Regel weiß...
  • Page 16 Installation des DWL-AG520 Wireless PCI Adapters in Ihren Rechner (Forts.) Befestigen Sie die Antenne vorsichtig an dem Antennenständer. Fertig! Antenne für Tisch- oder Wandbefestigung zur drahtlosen Verbindung mit einem 802.11a- oder 802.11b-Netzwerk Schraubbefestigung Hier wird die Schraube angebracht, die Verbindungs-/ Aktivitäts-LED den Adapter auf —...
  • Page 17 Rechner-Neustart Beim Neustart Ihres Rechners erscheint das Fenster Neue Hardware gefunden (Windows XP): Wählen Sie die Option Soft- ware automatisch installieren (Empfohlen) aus. Klicken Sie auf Next Für Windows XP: Nach dem Neustart kann das Warnfenster Hard- ware Installation erscheinen. Klicken Sie auf Installation fortsetzen, um die Installation...
  • Page 18 Eine Microsoft Zertifizierung ist beantragt. Glückwunsch! Die Installation ist nun abgeschlossen. Unter Windows 2000, ME oder 98SE wird dann das D-Link Air Premier DWLAG530-Konfigurations-Hilfsprogramm automatisch gestartet und das Programmsymbol erscheint in der rechten unteren Ecke des Desktop-Bildschirms (Taskleiste). Erscheint das Symbol in GRÜN,...
  • Page 19 Anhang Um das AirXpert-Hilfsprogramm unter Windows XP einzusetzen, gehen Sie wie folgt vor: Klicken Sie auf das Netzwerk- Symbol in der Taskleiste von XP, um die Zero Configuration Wireless Settings zu verwenden. Klicken Sie auf Erweitert Entmarkieren Sie das Kontrollkästchen Windows zum Konfigurieren der Einstellungen verwenden.
  • Page 20 AG530-Wireless-Verbindung zum Access Point an. Durch Einstellungen werden den Signal Strength-Wert wird die Stärke des vom DWL-AG530-Adapter Verbindungssignals zwischen dem Access Point und dem je nach Abstand zum DWL-AG530-Adapter angezeigt. Die grafische Anzeige gibt Access Point automatisch die prozentuale Signalstärke wieder. gewählt.
  • Page 21 SSID: Der Service Set Identifier ist die Namensbezeichnung des Wireless Mode: Wireless-Netzes. Die Die werksseitige Data Encryption: werksseitige SSID- SSID-Einstellung werksseitige Einstellung Einstellung lautet default. lautet Infrastructure. lautet Disabled. Der Adapter Änderungen zur Anpassung Ad-Hoc Mode wird für unterstützt bei aktivierter an die SSID vorhandener Peer-to-Peer Net- Verschlüsselung WEP und...
  • Page 22: Technische Unterstützung

    Technische Unterstützung Aktualisierte Versionen von Software und Benutzerhandbuch finden Sie auf der Website von D-Link. D-Link bietet kostenfreie technische Unterstützung für Kunden innerhalb Deutschlands, Österreichs, der Schweiz und Osteuropas. Unsere Kunden können technische Unterstützung über unsere Website, per E-Mail oder telefonisch anfordern.
  • Page 23 CD D-Link ! Windows. ©2003 D-Link Systems, Inc. All rights reserved. Tous droits réservés. Les marques ou les marques enregistrées sont la propriété de leurs propriétaires respectifs. Le logiciel et les spécifications sont susceptibles d’être modifiés sans préavis.
  • Page 24 Suite… L’écran d’installation apparaît. Cliquez sur Install Drivers Si la fonction Autorun de votre ordinateur n’est pas activée automatiquement, sélectionnez Démarrer > Exécuter et tapez « D: \Drivers\Setup.exe. ». Si elle est activée, passez à l’écran suivant. Tapez «D:\Drivers\Setup.exe.» La lettre «...
  • Page 25 Cliquez sur Suivant Cliquez sur Suivant Cliquez sur Terminer Éteignez votre ordinateur...
  • Page 26 Vérifiez que votre ordinateur est éteint et débranchez le câble d’alimentation. Retirez le panneau arrière ou latéral de l’ordinateur. Faites passer avec précaution l’antenne du DWL-AG530 à travers l’ouverture située à côté de l’emplacement PCI que vous destinez au DWL-AG530.
  • Page 27 Installation de l’adaptateur PCI sans fil DWL-AG530 dans votre ordinateur (suite) Placez l’antenne sur son support. Vous avez fini ! Antenne murale ou de bureau pour la connexion par radio à des réseaux 802.11a et 802.11b. Vis de fixation. La vis de fixation de l’adaptateur...
  • Page 28 Redémarrez votre ordinateur Lorsque vous redémarrez votre ordinateur, l’écran de l’Assistant de mise à jour du matériel (Windows XP) apparaît : Sélectionnez « Installer le logiciel automatiquement (recommandé) Cliquez sur Suivant Dans le cas de Windows XP : cet écran Installation matérielle peut apparaître après le...
  • Page 29 Si cette icône apparaît en VERT, c’est que vous avez installé avec succès le DWL-AG530, que vous êtes connecté à un réseau sans fil et que vous êtes prêt à communiquer ! Si l’icône de l’utilitaire de configu-...
  • Page 30 Annexe Sous Windows XP, si vous voulez utiliser l’utilitaire AirXpert, procédez de la façon suivante. Cliquez sur l’icône Connexion au réseau pour utiliser les paramètres Wire- less Zero Configuration. Cliquez sur Avancé Désactivez « Utiliser Windows pour configurer mon réseau sans fil ».
  • Page 31 Signal Quality : affiche la qualité de la liaison radio TxRate est déterminée avec le point d’accès pour le DWL-AG530. L’intensité du automatiquement par le signal est l’intensité du signal radio entre le point d’accès DWL-AG530 en fonction de et le DWL-AG530.
  • Page 32 Wireless Mode (mode de Data Encryption SSID : cet identificateur fonctionnement) : est le nom attribué au (cryptage) : par défaut le mode par défaut est le réseau sans fil. Sa valeur cryptage est Disabled. mode Infrastructure. par défaut est default. Lorsque le cryptage est Ad-Hoc est utilisé...
  • Page 33: Assistance Technique

    Assistance technique Vous trouverez la documentation et les logiciels les plus récents sur le site web D-Link. Le service technique de D-Link est gratuit pour les clients aux Etats-Unis durant la période de garantie. Ceuxci peuvent contacter le service technique de D-Link par notre site internet ou par téléphone.
  • Page 34: Antes De Empezar

    CD D-Link. sistemas operativos Windows. ©2003 D-Link Systems, Inc. Reservados todos los derechos. Las marcas o marcas registradas son propiedad de los respectivos titulares. El software y las especificaciones pueden ser modificados sin previo aviso.
  • Page 35 Continuación... Se mostrará la pantalla de instalación. Hacer click en Install Drivers Si la función Autorun del CD no se ejecuta automáticamente, ir a Start > Run, en el ordenador, y luego escribir “D: \Drivers\Setup. exe.”. Si se inicia el programa, pasar a la próxima pantalla.
  • Page 36 Hacer click en Next Hacer click en Next Hacer click en Finish Apagar el ordenador...
  • Page 37 Comprobar que el ordenador está apagado y desenchufar el cable de alimentación antes de empezar. Quitar la cubierta del ordenador. Con cuidado pasar la antena del DWL-AG530 a través de la abertura más cercana al slot que se quiera usar para el DWL-AG530.
  • Page 38 Instalar el adaptador PCI inalá mbrico DWL-AG530 en el ordenador (cont.) Conectar la antena al soporte de la antena ¡Terminado! Antena de sobremesa o pared para establecer conexiones inalámbricas con redes 802.11a y 802.11b Soporte de montaje soporte que asegura el...
  • Page 39 Reiniciar el ordenador Al reiniciar el ordenador, se mostrará la pantalla de Found New Hardware Wizard (Windows XP): Seleccionar Install de software automatically (Recommended) Hacer click en Next Para Windows XP: Esta pantalla de aviso de Hardware Installation puede mostrarse después de que se haya reiniciado el ordenador.
  • Page 40 La instalación ha finalizado Si se está en Windows 2000, Me o 98SE, se ejecutará automáticamente la utilidad de configuración D-Link Air Premier DWL-AG530, y el icono de la utilidad aparecerá en la parte inferior derecha de la pantalla del escritorio (systray).Si el icono es VERDE,...
  • Page 41 Apéndice Para Windows XP, si se desea utilizar la utilidad AirXpert, debe realizarse lo siguiente: Hacer click en el icono XP Networking para utilizar los parámetros sin necesidad de configuración (Zero Configura- tion Wireless Settings). Hacer click en Advanced. Desactivar “Use Windows to configure my wireless network settings”.
  • Page 42 DWL-AG530 con el punto de automáticamente el DWL- acceso. Aquí se representa la señal inalámbrica entre AG530 en función de la el punto de acceso y el DWL-AG530. El porcentaje distancia al punto de coincide con la barra gráfica. acceso.
  • Page 43 SSID: El identificador de red es el nombre asignado a la red inalámbrica. Por Wireless Mode: Data Encryption: defecto el parámetro SSID parámetro por defecto parámetro por defecto está en default. Aquí pueden es Infraestructure. El es Disabled. El hacerse los cambios modo Ad-Hoc se usa adaptador soporta WEP necesarios para que el SSID...
  • Page 44: Asistencia Técnica

    D-Link ofrece asistencia técnica gratuita para clientes dentro de España durante el periodo de garantía del producto. Los clientes españoles pueden ponerse en contacto con la asistencia técnica de D-Link a través de nuestro sitio web o por teléfono. Asistencia Técnica de D-Link por teléfono:...
  • Page 45: Prima Di Cominciare

    Windows XP. Le fasi descritte sono simili per altri CD D-Link. sistemi operativi Windows. ©2003 D-Link Systems, Inc. Tutti i diritti sono riservati. I marchi e i marchi registrati sono dei rispettivi proprietari. Il software e le specifiche sono soggetti a cambiamenti senza preavviso.
  • Page 46 Continua... Il sistema visualizza la finestra Install. Cliccare su Install Se la funzione Autorun non avvia automaticamente il CD, selezionare Start > Esegui e digitare “D:\Drivers\Setup. exe.” Se il CD viene avviato automaticamente passare alla schermata successiva. Digitare “D: \Drivers\Setup.exe.” “D”...
  • Page 47 Cliccare Avanti Cliccare Avanti Cliccare Fine Spegnere il computer...
  • Page 48 Prima di cominciare, verificare che il computer sia spento e il cavo di alimentazione scollegato. Rimuovere il pannello posteriore del computer. Inserire delicatamente l’antenna del dispositivo DWL-AG530 attraverso l’apertura adiacente allo slot PCI che si intende utilizzare. Inserire cautamente l’adattatore DWL-...
  • Page 49 Installazione dell’adattatore wireless PCI DWL-AG530 nel computer (continua) Montare l’antenna sul relativo supporto. Fine. Antenna installabile sulla scrivania a sul muro Supporta connessioni wireless a reti 802.11a e 802.11b Viti di montaggio LED Link/Activity Viti utilizzate per Quando il computer è...
  • Page 50 Riavvio del computer Al riavvio del computer, appare la finestra Installazione guidata nuovo hardware (Windows XP): Selezionare Installa il software automaticamente (consigliato) Cliccare Avanti Per Windows XP: Dopo il riavvio del computer, potrebbe apparire la finestra Hardware Installation. Cliccare su Continua terminare l’installazione Cliccare su...
  • Page 51 L’installazione è completa Continuando la procedura in ambiente Windows 2000, Me o 98SE, la Configura- tion Utility del dispositivo D-Link Air Premier DWLAG530 viene caricata automaticamente e la relativa icona viene visualizzata nell’angolo in basso a destra dello schermo (barra delle applicazioni). Se l’icona è VERDE, l’adattatore DWL-AG530 è...
  • Page 52 Appendice Per utilizzare la Configuration utility AirXpert in ambiente Windows XP, la procedura è la seguente. Cliccare sull’icona XP Net- working per utilizzare le Zero Configuration Wireless Settings. Cliccare su Advanced Deselezionare l’opzione “Use Windows to configure my wireless network settings.” Cliccare su...
  • Page 53 Auto; il che significa che il parametro TxRate viene Signal Strength: Visualizza la qualità della connessione impostato wireless tra l’adattatore DWL-AG530 e l’ Access Point. automaticamente Il valore Signal Strength rappresenta la potenza del segnale dall’adattatore DWL-AG530 wireless tra Access Point e adattatore DWL-AG530. La in base alla distanza dall’...
  • Page 54 SSID:Il Service Set Identi- fier rappresenta il nome della Wireless Mode: rete wireless. Il valore di L’impostazione default del parametro SSID è wireless corrisponde Data Encryption: default. In questo punto è a Infrastructure. La L’impostazione di default è possibile modificare il valore modalità...
  • Page 55: Supporto Tecnico

    Le ultime versioni del software e la documentazione aggiornata sono disponibili al sito D-Link. D-Link fornisce un supporto tecnico gratuito ai clienti residenti in Italia per tutto il periodo di validità della garanzia del prodotto. I clienti italiani possono contattare il supporto tecnico D-Link...
  • Page 56: Прежде Чем Начать

    продемонстрированы на примере Windows XP. Шаги и экраны в других версиях Windows будут похожими. ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.
  • Page 57 Продолжение... Появится экран установки. Install Drivers Нажмите Если функция Autorun на компьютере не запустится автоматически, нажмите кнопку Пуск > Выполнить и наберите “D:\Drivers\Setup. exe.” В противном случае переходите к следующему разделу. Наберите “D: \Drivers\Setup.exe.” “D” – логическое имя накопителя CD-ROM. Ваш накопитель...
  • Page 58 Next Нажмите Next Нажмите Finish Нажмите Выключите ваш компьютер...
  • Page 59 Установка беспроводного адаптера DWL-AG530 в компьютер Убедитесь, что компьютер выключен и шнур питания отсоединен от него. Откройте корпус компьютера. Аккуратно проведите антену DWL-AG530 через токрытый разъем PCI. Аккуратно установите DWL-AG530 и плотно вставьте его в свободный слот PCI (который обычно “белого”...
  • Page 60 Установка беспроводного адаптера DWL-AG530 в компьютер (продолжение) Аккуратно подключите антенну к разъему на задней панели адаптера Установка завершена! Настольная или монтируемая на стену антенна для беспроводного подключения к сети 802.11a и 802.11b Паз для винта Индикатор Link/Activity За этот паз...
  • Page 61 Перезагрузите ваш компьютер После перезагрузки компьютера Found New появится экран Hardware Wizard (Windows XP): Install the software Выберите automatically (Recommended) Next Нажмите Для Windows XP: Этот экран Hardware Installa- предупреждения tion может появиться после перезагрузки компьютера. Continue Нажмите Anyway для продолжения...
  • Page 62 Установка завершена! После того, как вы продолжите работу в Windows 2000, Me, или 98SE, утилита настройки D-Link Air Premier DWL-AG530 Configuration Utility стартует автоматически и появляется ярлык в нижнем правом углу панели задач рабочего стола. Если этот ярлык окрашен в...
  • Page 63 Приложение Для Windows XP, если вы хотите использовать утилиту AirXpert, выполните следующие шаги. Нажмите на иконку Сетевые подключения для настройки параметров беспроводного соединения. Advanced Нажмите Снимите галочку с пункта “Use Windows to configure my wireless network settings. Нажмите...
  • Page 64 по умолчанию Auto; это Signal Quality : Отображает качество сигнала означает, что скорость будет беспроводного соединения между адаптером выбираться автоматически в DWL-AG530 с точкой доступа. Качество зависимости от расстояния от адаптера DWL-AG530 до отображается графически в процентном отношении. точки доступа.
  • Page 65 K.SSID: (Service Set Identifier) – имя беспроводной сети. Значение заводских установок SSID - default. Wireless Mode: Измените данный параметр Значение заводских Data Encryption: для совпадения с SSID установок - Параметры по умолчанию Infrastructure. Режим Disabled. Адаптер существующего Ad-Hoc используется поддерживает протоколы беспроводного...
  • Page 66 D-Link обеспечивает бесплатную техническую поддержку клиентов в течение гарантийного срока изделия. Клиенты могут связаться со службой технической поддержки D-Link через наш web-сайт, или по телефону. Телефоны службы технической поддержки D-Link: +7 (095) 744 00 99 Техническая Поддержка D-Link через Internet:...
  • Page 67 必須至少有下列設備: 具有可用的PCI 2.2, 32-位,5伏PCI插槽的桌上型電腦 • 至少有500MHz的處理器和128MB記憶體 • 802.11a,802.11b,或802.11g 基地台(用於Infrastructure模式)或另外的802.11a,802.11b, • 或802.11g 無線網卡(用於Ad-Hoc;對等網路模式) 檢查包裝內容 以下是購買DWL-AG530時包括的配件: 頻 DWL-AG530 雙 段無線PCI網卡 CD-ROM (包括驅動程式,手冊和保證書) 如以上內件有任何遺失, 請聯繫經銷商 在PC中插入D-L ink CD 在從D-Link CD處 啟動電腦,在光碟機裏放入D-L ink A irX pert 安裝驅動軟體之 DWL -A G530驅動C D 前,不要把DWL-AG530無 線PCI網卡安裝在電腦裏. 接著的指導會一步接一步顯示在Windows X P上.這些...
  • Page 68 繼續... 安裝螢幕將會顯示 點擊 Install Drivers 如果CD自動運行功能在您的電 腦上不能自動運行, 請 進入 Start>Run,輸入D:\Drivers\ Setup.exe.若開始運行,繼續到下 一畫面 輸入 “D:\Drivers\Setup.exe.” 字母” D” 代表光 碟機, 用戶光碟機 可以是不同的字母 點擊 點擊 Next 點擊 Next...
  • Page 69 點擊 Next 點擊 Next 點擊 Finish 關 閉 電 腦...
  • Page 70 在電腦裏安裝DWL-AG530無線PCI網卡 確認關閉電腦,拔去電源線。卸下電腦後機箱蓋 仔細的將DWL-AG530的天線,從預定安裝DWL-AG530網卡的鄰近PCI插 槽繞出 小心地安裝DWL-AG530,穩固地把它 插在可用的PCI槽上(通常是白色或 黃色) 確認已用螺絲固定DWL-AG530擴充槽 檔板。 重新安裝好電腦機箱蓋 為了避免因人體所帶靜電導致的損壞,在接觸DWL- AG530 PCI無線網路卡之前,請先觸摸一下您電腦的 金屬部分,以確保經由接地消除了可能存在的靜電。...
  • Page 71 在電腦上安裝DWL-AG530無線PCI網卡 ( 繼續) 輕輕地將天線連接到天線架上 .完成! 桌面或牆上安裝天線與802. 11a和802.11b網路的無線連接 螺絲安裝: 能 將網卡安全地 Link/Activity LEDs 安裝在適合此 電腦在執行時, 表 示卡 天線電纜- 連接 插槽的電腦的 片正確安裝; 資 料傳送 DWL-AG530 PCI板 後部上 時, LED閃爍 與外部天線...
  • Page 72 重新啟動電腦 重新啟動電腦時,Found New Hardware Wizard (Windows XP) 畫面會出現 選擇 自動安裝軟體(建議選 項) 點擊 Next 對於Windows X P: 電腦重新啟動 後, 硬體安裝 警告畫面可能會出現. 點擊 Continue Anyway 完成安裝 點擊 Finish ,完成安裝...
  • Page 73 繼續... 對於Windows2000,電腦 重新啟動後,這個 找不到 數位簽章畫面可能會出現 點擊 es,完成安裝 D-L ink 軟體尚未通過 Windows 標誌測試,微軟認證正在測試中 完成安裝 完成Windows X P,2000,ME,或98SE的安裝後, D-Link Air Premier DWL-AG530設定應 用程式會自動執行, 應 用程式圖示會顯示在桌面畫面上的右下角. 如 果這個圖示 是綠色的,那表明已經成功安裝了DW L - A G 530,準備連接無線網路, 並且準備 開始通信. 如果應用程式圖示沒有出現, 雙 擊出現在桌面上臨近的圖示 雙擊應用程式圖示, 使用設定應用程式...
  • Page 74 附錄 對於Windows XP,如果希望使用AirX pert應用程式,請依照下列步驟進行. 單擊X P 網路圖示, 使用零組態無 線設定 單擊 進階 不要選擇使用 W i n d o w s 來設定我的無線網路 點擊...
  • Page 75 附錄( 繼續) 使用配置應用程式 Status: 顯示與 SSID:分配給無線網 C.Frequency: 顯示當前與基 DWL-AG530相關 路的名稱(Service Set 地台連線所使 的基地台 Identifier)出廠SSID預設 用的頻率. 的MAC地址. 為default. Wireless Mode: 出廠設置為Infrastructure. Ad-Hoc用於對等的網路. 顯示當前無線連接的加密狀態. Encryption: 顯示通道資訊.通 以圖 Channel: Packet Count: Connection Info: 顯示連接無線基地台與認 道預設值為1,選項自動由DWL- 形的形式顯示傳送和接 證的相關訊息. AG530決定. 收的資料的統計. 預設設定為 TxRate: 顯示DWL-AG530與基地台無線連 Signal Quality : Auto ,意即TxRate設定是...
  • Page 76 SSID:分配給無線網路的 Wireless mode: 名稱.出廠.SSID預設為 出廠設置為 Data Encryption:預設設 default。您可以在此做一些 Infrastructure. A d- 置為Disabled.允許加密時, 更改,以配合無線路由器或基 Hoc模式用於對等的 網卡支援WEP和AES 地台上的SSID 網路 用戶可以為 Authentication: 允許認證時,用戶可以指定 Key Length: 無線網路指定認證模式預設設置 使用加密的標準和密鑰格式.選擇恰當的密鑰 為默認設置為Open A uthentica- 指數:1-4,在合適的框中輸入ACSII或十六進位 tion 數. 起用加密時,可選擇指定該加密的級別與密鑰格式。 選擇適當的密 IEEE 802.1x: 鑰指數(Key Index): 1-4並在適當區域輸入ACSII或十六進位數。...
  • Page 77 友冠技術支援 台灣地區用戶可以透過我們的網站,電子郵件或電話與友冠資訊 技術支援人員 聯絡。 支援服務時間從週一到週五,上午8:30 a.m. 到 5:30 p.m Web: http://www.dlinktw.com.tw/ FAQ: http://www.dlinktw.com.tw/faq.html Email: dssqa@dlinktw.com.tw Phone: 0800-002-615 如果您是台灣地區以外的用戶,請參考使用手冊中記載的D-Link 全球各地分公司的聯絡資訊取得支援服務。...

Table of Contents