Data Matrix Code Page; Maxicode - Honeywell Voyager XP 147 Series User Manual

Data Matrix Message Length
Scan the barcodes below to change the message length. Refer to
Description
lengths = 1-3116. Minimum Default = 1, Maximum Default = 3116.
Minimum Message Length

Data Matrix Code Page

Data Matrix Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
Character Replacements
from the

MaxiCode

MaxiCode On/Off
Voyager XP User Guide
(page 114) for additional information. Minimum and Maximum
on page 220), and scan the value and the Save barcode
Programming Chart. The data characters should then appear properly.
< Default All MaxiCode Settings >
On
Data Matrix Code Page
Message Length
Maximum Message Length
ISO 2022/ISO 646
* Off
155