Data Matrix Message Length
Scan the bar codes below to change the message length. Refer to
Description
lengths = 1-3116. Minimum Default = 1, Maximum Default = 3116.
Minimum Message Length
Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
bar code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the bar code below,
select the code page with which the bar codes were created (see
Character Replacements
from the
MaxiCode
MaxiCode On/Off
Voyager 1470/1472 User Guide
(page 114) for additional information. Minimum and Maximum
on page 220), and scan the value and the Save bar code
Programming
Chart. The data characters should then appear properly.
< Default All MaxiCode Settings >
On
Data Matrix Code Page
Message Length
Maximum Message Length
ISO 2022/ISO 646
* Off
155