Philips TSU6000 User Manual page 8

Getting Started
Selecting Brands and Code Sets
A list of brands and their corresponding RC codes are stored in the Remote
Control's memory.
You have to select your brand from the list. Because not every device of a certain
brand uses the same RC codes, you might also have to select a set of RC codes for
your brand.
1 Tap Next.
A scrollable list of brands for the selected
device and a "virtual auto-zooming"
mini-keyboard appears.
2 Navigate through the list of brands using the scroll buttons
• By tapping the scroll buttons, you scroll through the brands one by one.
• By holding down the scroll buttons, the scrolling speed increases.
-or-
Navigate through the list of brands using the mini-keyboard to jump
through the list of brands.
• To enter a character, tap the keyboard near the character you want to use.
User Guide
to scroll up or down in the list of brands.
The keyboard is zoomed in, allowing you to tap exactly the character you
need.
After you have tapped the character, the keyboard is zoomed out. Repeat
this action for every character.
Note You can zoom out again without tapping a character by pressing the right
action button (labeled Zoom).
8
and