Philips TSU6000 User Manual page 26

Getting the Maximum out of it
Learning Control Panel Buttons
1 Navigate to the control panel button you want to program.
2 Switch to Learn mode via the Remote Control icon
Additional empty buttons and previously deleted
buttons appear.
3 Point the device's original remote control to the Remote Control's
learning eye as shown above.
4 Tap the Remote Control button you want to program.
5 Press and hold the corresponding button on your device's original
remote control.
If the Remote Control has learned the command successfully, OK flashes on
the Remote Control icon.
If the Remote Control has not learned the command successfully, you hear a
short buzz and FAIL appears on the Remote Control icon.
6 Program all other buttons you want and relabel them if necessary
(see p. 29).
7 Return to Use mode via the Remote Control icon.
User Guide
26
The button
starts flashing
.