Adding And Moving - Philips TSU6000 User Manual

Adding and Moving

Adding Devices
If you have a device that is not provided in the Device menu, you can add it to the
Remote Control.
You cannot add devices to the Home panel directly. You have to add them via the
Device menu.
1 Make sure the Device tab is active.
The Device tab is active when the name of a device is displayed at the right
side of the touch screen
2 Switch to Add mode via the Remote Control icon
The Remote Control displays the following choices:
• Create New Device: Choose this option to add a completely new device.
• Copy Existing Device: Choose this option to copy a device already provided
• Restore Deleted Device: Use this option to restore a device you have
3 Tap the device you want to add in the Device menu.
Note
The Remote Control gives you the possibility to add the new device with or
without RC codes.
• Create with RC codes: Choose this option if you think the new device
• Don't add RC codes: If you choose this option, the new device is added
4 Tap the button of your choice.
The new device is automatically displayed in Use mode.
Moving Devices, Macro Groups or Timer Groups
You can change the order in the Device menu and the Macro menu. Changes you
make in the Device menu are automatically updated on the Home panel.
1 Make sure the Device tab or Macro tab is active.
The Device tab or Macro tab is active when the name of a device, macro or
timer is displayed at the right side of the touch screen.
User Guide
31
Getting the Maximum out of it
in the Device menu (for example for a second television).
deleted.
If the device you want to add is not provided, choose a similar one. You can
customize it later.
understands RC codes. The new device is added with operational buttons.
without operational buttons. You have to program them as explained in
"Learning Control Panel Buttons" on page 26.
You cannot define the device in Brand mode, because there are no RC
codes available.
.
.