Philips TSU6000 User Manual page 28

Getting the Maximum out of it
Learning Direct-access and Action Buttons
Direct-access and action buttons can be programmed with a global function or
with functions per device.
• Buttons with functions per device execute commands depending on the active
device. For example, the left action button is the Play command when the VCR
is active.
• Buttons with global functions always execute the same command, no matter
what device is active.
Note
Learning a button per device
1 Switch to the device for which you want to program the button.
2 Complete instructions 2 to 7 in "Learning Control Panel Buttons" on
page 26. Instead of tapping a button on the touch screen, press the
direct-access button or the action button you want to program.
The label for the direct-access button you have pressed (e.g. chan +) starts
flashing on the Remote Control icon.
The label above the action button you have pressed (e.g. play ) starts flashing.
Learning a button globally
1 Tap the Home button
2 Complete instructions 2 to 7 in "Learning Control Panel Buttons" on
page 26. Instead of tapping a button on the touch screen, press the
direct-access button or the action button you want to program.
The label for the direct-access button you have pressed (e.g. chan +) starts
flashing on the Remote Control icon.
The label above the action button you have pressed (e.g. play ) starts flashing.
User Guide
28
Per device functions overrule global functions. For example, when you program the
Volume buttons globally, but you assign a specific function to them with the tuner,
the specific command will be executed when the tuner is the active device.
.