Safety Precautions; Cautions; Air Receiver; Safety Valve - Makita MAC3001 Operating Instructions Manual

Please familiarize yourself with the following information to prevent
damage to your compressor unit and injury to the operator.

CAUTIONS

CAUTION
operates automatically while the power is connected and turned on.
WARNING
spraying paint or chemicals, or when sandblasting.
glasses or goggles when using compressed air.
It is not practical or possible to warn you about all the hazards associated
with operating or maintaining this equipment. You must use your own good
judgment.

AIR RECEIVER

Over pressurizing the air compressor could cause personal injury or
material damage. To protect from over pressurizing, a factory pre-set
safety valve is installed.
Any replacement parts should be purchased with the same specifications
as the original equipment.
replacement parts or specifications.

SAFETY VALVE

This valve is factory installed to prevent over pressurizing of the air receiver.
It is factory set at a specific limit for your particular model, and should never
be tampered with.
Adjustment by user will automatically VOID the warranty.

SAFETY PRECAUTIONS

The air compressor motor will get hot while in
operation. Never touch the discharge tubing, motor or
compressor pump while in operation. The compressor
Compressed air from the unit may contain hazardous
fumes. Air produced by this compressor is not suitable
for breathing purposes. Always use a respirator when
NEVER WELD, DRILL OR CHANGE THE AIR
RECEIVER IN ANY WAY
Please contact the authorized dealer for
DO NOT REMOVE, MAKE ADJUSTMENTS TO
OR SUBSTITUTE THIS VALVE!
Always wear safety
5