Safety Precautions; Cautions; Air Receiver; Safety Valve - Makita MAC5500G Operating Instructions Manual

SAfEty PRECAutIOnS
Please familiarize yourself with the following information to prevent
damage to your compressor unit and injury to the operator.

CAutIOnS

CAUTION
compressor operates automatically while the engine is running.
WARNING
pirator when spraying paint or chemicals, or when sandblasting. Always
wear safety glasses or goggles when using compressed air.
It is not practical or possible to warn you about all the hazards associated
with operating or maintaining this equipment. You must use your own
good judgment.
AIR RECEIvER
Over pressurizing the air receiver could cause personal injury or material
damage. To protect from over pressurizing, a factory pre-set safety valve
is installed.
Any replacement parts should be purchased with the same specifica-
tions as the original equipment. Please contact the authorized dealer for
replacement parts or specifications.
SAfEty vALvE
This valve is factory installed to prevent over pressurizing of the air
receiver. It is factory set at a specific limit for your particular model, and
should never be tampered with.
Adjustment by user will automatically void the warranty.

The air compressor and engine will get hot while in
operation. Never touch the discharge tubing, engine
or compressor pump while in operation. The
Compressed air from the unit may contain hazard-
ous fumes. Air produced by this compressor is not
suitable for breathing purposes. Always use a res-
nEvER wELD, DRILL OR ChAnGE
thE AIR RECEIvER In Any wAy
DO nOt REMOvE,
MAkE ADJuStMEntS tO
OR SubStItutE thIS vALvE!