Advertisement

Quick Links

FSK76738P
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Summary of Contents for AEG FSK76738P

  • Page 1 FSK76738P User Manual Dishwasher USER MANUAL...
  • Page 2: Table Of Contents

    6. PROGRAMME SELECTION................10 7. BASIC SETTINGS ..................... 12 8. WIRELESS CONNECTION................16 9. BEFORE FIRST USE..................18 10. DAILY USE....................... 19 11. HINTS AND TIPS....................22 12. CARE AND CLEANING..................23 13. TROUBLESHOOTING..................27 14. TECHNICAL INFORMATION................33 15. ENVIRONMENTAL CONCERNS..............34 My AEG Kitchen app...
  • Page 3: Safety Information

    ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 4 Children between 3 and 8 years of age and persons • with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept •...
  • Page 5: Safety Instructions

    ENGLISH Before any maintenance operation, deactivate the • appliance and disconnect the mains plug from the socket. Do not use high pressure water sprays and/or steam • to clean the appliance. If the appliance has ventilation openings in the base, •...
  • Page 6 • To replace the internal lighting, mains socket. Contact the Authorised contact the Authorised Service Service Centre to replace the water Centre. inlet hose. 2.6 Service • Without electrical power, the water protection system is not active. In this •...
  • Page 7: Installation

    3.1 Building in damaged, contact the Authorized Service Centre to replace it with the new one. www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher min. 560 1240 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury.
  • Page 8: Product Description

    The lamp goes off when you close the your mobile device to be redirected to My door or switch the appliance off. AEG Kitchen app in the app store. Follow Otherwise, it goes off automatically after the instructions on your mobile device to some time to save energy.
  • Page 9: Control Panel

    ENGLISH 5. CONTROL PANEL On/Off button / Reset button MY TIME program selection bar Delay start button / Remote start Option buttons (EXTRAS) button AUTO Sense program button Display 5.1 Display 5.2 ECOMETER The ECOMETER indicates how the programme selection impacts energy and water consumption.
  • Page 10: Programme Selection

    45 °C. test institutes. 6.4 Extras in the app 6.2 AUTO Sense My AEG Kitchen app provides additional dishwashing options. To access all The AUTO Sense programme options, connect your dishwasher to the automatically adjusts the dishwashing app.
  • Page 11 ENGLISH 6.5 Programmes overview Pro‐ Dishwasher Degree of Programme phases EXTRAS gramme load soil Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • ExtraHygiene • AirDry Pre-rinse • Prewash Not applicable Crockery,...
  • Page 12: Basic Settings

    • Final rinse • AirDry 1) Automatic door opening during the drying phase. Refer to "Basic settings". 2) Available only through My AEG Kitchen app. 3) Available only through My AEG Kitchen app. Consumption values Water (l) Energy (kWh) Duration (min)
  • Page 13 ENGLISH Number Setting Values Description Rinse aid level 0A - 6A (default: Adjust the level of the rinse aid according to the necessary dosage. End sound Activate or deactivate the acoustic signal Off (default) for the end of a programme. Auto door open On (default) Activate or deactivate the AirDry.
  • Page 14 How to change a setting The appliance returns to the programme selection. Make sure the appliance is in setting The saved settings remain valid until you mode. change them again. 1. Use Previous or Next to select the 7.2 The water softener bar of the ECOMETER dedicated to the desired setting.
  • Page 15 ENGLISH the total energy consumption of a Multi-tabs containing salt are programme by additional 2 Wh. The not effective enough to rinsing of the softener ends with a soften hard water. complete drain. Regeneration process Each performed softener rinse (possible For the correct water softener operation, more than one in the same cycle) may the resin of the softener device needs to...
  • Page 16: Wireless Connection

    8. WIRELESS CONNECTION You can connect your dishwasher to the remotely control and monitor your home wireless network and then link it to dishwasher. your mobile devices in My AEG Kitchen app. This functionality allows you to...
  • Page 17 • Mobile device connected to the wireless network. 8.3 How to activate the wireless connection 1. Launch My AEG Kitchen app on your mobile device and follow the instructions in the app. When Press and hold simultaneously prompted in the app, activate the for 2 seconds.
  • Page 18: Before First Use

    • The display shows Off and then Connect the dishwasher to the network --- for a few seconds. and to the app to enter new network credentials. Refer to the instructions • The indicator is off. provided earlier in this chapter.
  • Page 19: Daily Use

    ENGLISH 9.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid designed specifically for dishwashers. 1. Open the lid (C). 2. Fill the dispenser (B) until the rinse aid reaches the marking ''MAX''. 3. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation.
  • Page 20 • The display shows APP. you start a programme. 2. Close the appliance door. If the latest programme 3. Use My AEG Kitchen app to remotely selection is enabled, the operate the appliance. saved options are activated Opening the door automatically along with the deactivates the remote start.
  • Page 21 ENGLISH 10.9 Opening the door while The appliance senses the type of load and adjusts a suitable wash cycle. the appliance operates During the cycle, the sensors operate several times and the initial program Opening the door while a programme is duration can decrease.
  • Page 22: Hints And Tips

    All buttons are inactive except for the If the display shows upd, on/off button. refer to "Troubleshooting". 11. HINTS AND TIPS 11.1 General – Follow the instructions in the chapter "Care and cleaning". Follow the hints below to ensure optimal cleaning and drying results in daily use 11.2 Using salt, rinse aid and...
  • Page 23: Care And Cleaning

    ENGLISH 1. Set the highest level of the water • Do not wash in the appliance items softener. made of wood, horn, aluminium, 2. Make sure that the salt and rinse aid pewter and copper as they could containers are full. crack, warp, get discoloured or pitted.
  • Page 24 How to start the Machine 1. Disassemble the filters system as instructed in this chapter. Care programme 2. Remove any foreign objects manually. Before starting the Machine 3. Reassemble the filters as instructed Care programme, clean the in this chapter.
  • Page 25 ENGLISH 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 12.6 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
  • Page 26 3. To install the spray arm back, press it downwards. 4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place.
  • Page 27: Troubleshooting

    ENGLISH element (B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside.
  • Page 28 Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 29 ENGLISH Problem and alarm code Possible cause and solution The level of water inside the • Switch the appliance off and on. appliance is too high. • Make sure that the filters are clean. The display shows iF1. • Make sure that the outlet hose is installed at the right height above the floor.
  • Page 30 Problem and alarm code Possible cause and solution The appliance is switched • Power supply is out of the operating range. The wash on but does not operate. cycle is temporarily interrupted and resumes automati‐ The display shows PF.
  • Page 31 ENGLISH 13.2 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.
  • Page 32 Problem Possible cause and solution Odours inside the appliance. • Refer to "Internal cleaning". • Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the ta‐ • The level of salt is low, check the refill indicator.
  • Page 33: Technical Information

    ENGLISH Problem Possible cause and solution The app cannot connect to the • There is a trouble with the wireless network signal. dishwasher. Check your wireless network and router. Restart the router. • Check if your mobile device is connected to the net‐ work.
  • Page 34: Environmental Concerns

    15. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste. Return the Put the packaging in relevant containers product to your local recycling facility or to recycle it. Help protect the contact your municipal office.
  • Page 36 My AEG Kitchen app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)

Table of Contents