1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSK75758P
  6. User manual

AEG FSK75758P User Manual

Hide thumbs Also See for FSK75758P:
Table of Contents

Advertisement

Quick Links

Download this manual
FSK75758P
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSK75758P

Summary of Contents for AEG FSK75758P

  • Page 1 FSK75758P User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    13. ENVIRONMENTAL CONCERNS..............28 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...

  • Page 4: Safety Instructions

    If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position.
  • Page 5 ENGLISH access to the mains plug after the • Do not drink and play with the water in installation. the appliance. • Do not pull the mains cable to • Do not remove the dishes from the disconnect the appliance. Always pull appliance until the programme is the mains plug.

  • Page 6: Product Description

    2.7 Disposal drain filters, interior racks and plastic peripherals such as baskets and lids. • Concerning the lamp(s) inside this WARNING! product and spare part lamps sold Risk of injury or suffocation. separately: These lamps are intended • Disconnect the appliance from the to withstand extreme physical mains supply.

  • Page 7: Control Panel

    ENGLISH Otherwise, it goes off automatically after some time to save energy. 4. CONTROL PANEL On/Off button / Reset button EXTRAS buttons Delay Start button AUTO Sense program button Display MY TIME selection bar 4.1 Display The ECOMETER indicates how the programme selection impacts energy The display shows the following and water consumption.

  • Page 8: Programme Selection

    Indicator Description Delay Start indicator. It is on when you set the delay start. Refer to "Daily use". Pause indicator. It flashes when you pause a wash cycle or the delay countdown by opening the appliance door. Refer to "Daily use".
  • Page 9 ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of soil Programme phases EXTRAS load Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry Crockery, Fresh, lightly • Dishwashing 60 °C •...

  • Page 10: Basic Settings

    Water (l) Energy (kWh) Duration (min) 1) 2) Programme 11.8 0.970 1h 30min 11.9 1.110 2h 40min 11.9 1.210 0.644 AUTO Sense 12.1 1.22 Machine Care 10.6 0.710 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
  • Page 11 ENGLISH Settings Values Description Display on floor ON (default) Activate or deactivate TimeBeam. Brightness From level 0 to level Adjust the brightness of the display. Language List of languages Set the preferred language. (default: English) Reset settings Reset the appliance to the factory settings. PNC number Number Check the PNC number of your appliance.
  • Page 12 The higher the content of these minerals, your area. Your local water authority can the harder your water is. Water hardness advise you on the hardness of the water is measured in equivalent scales. in your area. It is important to set the...
  • Page 13 ENGLISH programme, before the rinse (twice and the refill notification. However, for during a programme). Regeneration best drying performance, always use initiation has no impact on the cycle rinse aid and keep the notification active. duration, unless it occurs in the middle of To deactivate the rinse aid dispenser and a programme or at the end of a the notification, set the rinse aid level to...

  • Page 14: Before First Use

    TimeBeam displays the following CAUTION! information on the floor below the If children have access to appliance door: the appliance, we advise to • The programme duration when the deactivate AirDry. The programme begins. automatic opening of the • 0:00 and CLEAN when the door may pose a danger.

  • Page 15: Daily Use

    ENGLISH How to fill the salt container 7.2 How to fill the rinse aid dispenser 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (only for the first time). 3.
  • Page 16 8.1 Using the detergent 8.2 How to select and start a programme using MY TIME selection bar 1. Slide your finger across MY TIME selection bar to choose a suitable programme. • The light related to the selected programme is on.
  • Page 17 ENGLISH 8.4 How to start the AUTO Opening the door while the Sense program appliance operates may affect the energy 1. Press consumption and the • The light related to the button is programme duration. • The display shows the longest If the door is opened for possible program duration.

  • Page 18: Hints And Tips

    The Auto Off function switches the All buttons are inactive except for the appliance off automatically. on/off button. 9. HINTS AND TIPS 9.1 General 9.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use •...

  • Page 19: Care And Cleaning

    ENGLISH 3. Start the Quick programme. Do not pewter and copper as they could add detergent and do not put dishes crack, warp, get discoloured or pitted. in the baskets. • Do not wash in the appliance items 4. When the programme is completed, that can absorb water (sponges, adjust the water softener according household cloths).
  • Page 20 How to start the Machine 2. Remove any foreign objects manually. Care programme 3. Reassemble the filters as instructed in this chapter. Before starting the Machine Care programme, clean the 10.4 External cleaning filters and spray arms. • Clean the appliance with a moist soft 1.
  • Page 21 ENGLISH 4. Wash the filters. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 10.6 Cleaning the lower spray We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes.
  • Page 22 3. To install the spray arm back, press it downwards. 4. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place.

  • Page 23: Troubleshooting

    ENGLISH element (B) counterclockwise and pull the spray arm downwards. 4. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. Run the water through the holes to wash soil particles away from the inside.
  • Page 24 Problem and alarm code Possible cause and solution You cannot activate the ap‐ • Make sure that the mains plug is connected to the mains pliance. socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 25 ENGLISH Problem and alarm code Possible cause and solution Technical malfunction of the • Switch the appliance off and on. appliance. The display shows iC0 or iC3. The level of water inside the • Switch the appliance off and on. appliance is too high.
  • Page 26 Problem and alarm code Possible cause and solution The appliance is switched • Power supply is out of the operating range. The wash on but does not operate. cycle is temporarily interrupted and resumes automati‐ The display shows Power cally once the power is restored.
  • Page 27 ENGLISH Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad‐ drops on glasses and dishes. just the rinse aid dosage to a higher level. • The quality of the rinse aid can be the cause. The interior of the appliance is •...

  • Page 28: Technical Information

    Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 560 Voltage (V) 200 - 240 Electrical connection...
  • Page 32 www.aeg.com/shop...

Table of Contents