Makita MW001G Instruction Manual page 7

Indicator lamps
Lighted Off
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
NOTE: The first (far left) indicator lamp will blink when
the battery protection system works.
UTENSILS GUIDELINE
CAUTION:
Never use the metal containers for
microwave cooking and combination cooking as
spark is likely to occur.
It is strongly recommended to use the containers which
are suitable and safe for microwave cooking. Generally
speaking, the containers which are made of heat-resis-
tant ceramic, glass or plastic are suitable for microwave
cooking.
You can take the reference of below table.
Material of
container
Heat-resistant Yes
ceramic
Heat-resistant Yes
plastic
Heat-resistant Yes
glass
Grill rack No
Plastic film Yes
Attaching the shoulder belt
Optional accessory
CAUTION:
Make sure the shoulder belt
securely attached properly. Otherwise falling acci-
dent may occur.
1. Put the belt through the two holes on the handle.
2. Buckle the belt.
Remaining
capacity
Blinking
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the
battery.
The battery
may have
malfunctioned.
Notes
Never use the ceramics which
are decorated with metal rim or
glazed.
It cannot be used for long time
microwave cooking.
It should not be used when
cooking meat or chops as the
over-temperature may do damage
to the film.
Fig.5
Appliance / battery protection
system
The appliance and battery are equipped with the protec-
tion system. This system automatically cuts off power
to the motor to extend appliance and battery life. The
appliance will automatically stop during operation if the
appliance or battery is placed under one of the following
conditions.
• Overload protection : When the appliance or
battery is operated in a manner that causes it to
draw an abnormally high current, the appliance
automatically stops without any indication. In
this situation, turn the appliance off and stop the
application that caused the appliance to become
overloaded. Then turn the appliance on to restart.
• Overheat protection : When the appliance or
battery is overheated, the appliance automatically
stops. Let the appliance cool down before turning
it on again.
• Overdischarge protection : When the battery
capacity becomes low, the appliance stops auto-
matically. If the appliance does not operate even
when the switches are operated, remove the
battery cartridge from the appliance and charge it.
Door opening and closing protection
function
If the door is opened during the operation, the micro-
wave stops working immediately, the light inside the
cavity turns on, and the microwave work gets sus-
pended. After the door is closed, the light inside the
cavity goes out. Press the start button again to resume
the operation.
When opening the door while the program is running
and do not close it within 3 minutes, the appliance exit
the program and shut down.
The operation does not start without closing the door.
When pressing the start button with the door open, the
7 ENGLISH