Advertisement
Quick Links
Advertisement
Related Manuals for HIKVISION AE-VC236T
Summary of Contents for HIKVISION AE-VC236T
- Page 1 Low Illumina�on Fisheye Vehicle-Mounted Camera User Manual UD32639B-A...
-
Page 2: Legal Disclaimer
MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF... - Page 3 Regulatory Informa�on FCC Informa�on FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference when the equipment is operated in a commercial environment.
- Page 4 Foreword These instruc�ons are intended to ensure that user can use the product correctly to avoid danger or property loss. Before using, please read the manual carefully and keep it properly for further reference. Symbol Conven�ons The symbols that may be found in this document are defined as follows.
-
Page 5: Package Check
1 Package Check 1.1 Before You Begin Before unboxing, please check whether the package is intact. Unbox and refer to the list to make sure that all the assembly parts are included. If there is no problem, the device is ready for installa�on. 1.2 Packing List The packing list of the vehicle-mounted camera is shown below. - Page 6 2.2 Overview 2.2.1 Overview of Camera Camera Body Rubber Blanket Cable Figure 2-1 Overview 2.2.2 Cables The product include 2 models, 2 kinds of cables are compared with different models. Make sure the cable is correct before you wiring. Avia�on Plug Interface The camera is designed with an avia�on plug, as shown below, to ensure shock-proof.
-
Page 7: Installation
3 Installation Before you start, Please make sure that the device in the package is in good condi�on and all the assembly parts are included. CAUTION Make sure the part, which is used to install the camera, is strong enough to withstand four �mes the weight of the camera and the moun�ng.