Boss-Secretary Override-Pri - NEC NEAX 2400 IPX Programming Manual

BOSS-SECRETARY OVERRIDE-PRI

B-22 BOSS-SECRETARY OVERRIDE-PRI
1. General Description
This feature enables a secretary to voice-announce a call from an ISDN trunk to a boss when he is currently on
his My-line.
2. Operating Procedure
Example: Station 200, Boss
Station 201, Secretary
Boss is currently connected to Trunk "A". Call from an ISDN trunk (Trunk "B") terminates to Station 201,
intended for 200.
1. Secretary answers station 201.
2. Secretary asks caller to hold and presses "CALL HOLD" [C-6] feature key or "TRANSFER" key and dials
CALL HOLD [C-6] code (CALL WAITING-ORIGINATING [C-31] key can also be used).
Secretary hears Dial Tone.
3. Secretary presses "SPEED CALLING-ONE TOUCH" [S-26D] key on which BOSS-SECRETARY
OVERRIDE tone code, RECALL key and Boss' station number (200) has been programmed.
4. Secretary hears Ringback Tone; Boss receives three bursts of Waiting Tone.
<BOSS' RESPONSE OPTIONS>
Operations when the boss converses with Trunk "A" while talking with trunk "B".
1. Boss presses the "TRANSFER" key. If Boss has a single line telephone, flashes hook switch.
2. Boss converses with Trunk "A" and Trunk "B" receives hold tone (MUSIC ON HOLD [M-7]).
3. Boss presses the "TRANSFER" key again. If a single line telephone, flashes hook switch again.
4. Boss converses with Trunk "B". (THREE-WAY CALLING [T-2] is not available).
Other operations while Boss and Secretary are talking.
Case 1:
1. Boss or secretary presses the "TRANSFER" key.
2. The Boss and Secretary are disconnected; Boss converses with Trunk "A", Secretary converses with Trunk
"B" respectively.
Case 2:
1. Boss hangs up and secretary converses with Trunk "B" again.
2. Boss' station rings and Trunk "A" receives Ringback Tone.
3. Boss lifts the handset and converses with Trunk "A" again.
CHAPTER 5
Page 38
Revision 1.0
NDA-24305