Ldn Night Connection-Pri - NEC NEAX 2400 IPX Programming Manual

Hide thumbs Also See for NEAX 2400 IPX:
Table of Contents

Advertisement

LDN NIGHT CONNECTION-PRI

L-44
LDN NIGHT CONNECTION-PRI
1. General Description
This service feature routes Listed Directory Number (LDN) calls from both ISDN/non-ISDN network to a
preselected station within the system, when the Night mode has been entered.
2. Operating Procedure
To answer LDN NIGHT CONNECTION calls:
1. An incoming LDN call in Night mode is automatically routed to a preselected LDN NIGHT
CONNECTION station within the system.
2. The calling party receives Ringback Tone.
3. The ringing signal is sent to the LDN NIGHT CONNECTION station.
4. The LDN NIGHT CONNECTION station goes off-hook to answer the incoming call. If necessary, this
station can transfer the incoming call to another station within the system using the CALL TRANSFER-
ALL CALLS [C-11] service.
3. Programming
STEP 1: ALDN - Assign LDN number and its transfer destination.
STEP 2: ACFR - Assign the TSFI: 2 (Night Connection-Fixed) to be allowed CCI: 1 (LDN). This allows
CHAPTER 5
Page 106
Revision 1.0
TN:
Tenant Number
LDN: Listed Directory Number (must match station numbering plan)
Night Transfer: Y/N
If no, then LDN will only go to Attendant.
If yes, then the following parameters will be enabled:
Type: Night Transfer Type
1: Station number
2: Outside (up to 8 digits)
3: ADC (when more than 8 digits are required)
For Type 1, assign station number here.
LDN to go to night transfer destination.
NDA-24305

Advertisement

Table of Contents
loading

Table of Contents