2) Install the Positioning Pin.
• 2 Screws (RS tightening; M4x10)
x2
7
Installation > Installation Procedure > Connecting with the the Professional Puncher Integration Unit
F-7-39
7
Installation > Installation Procedure > Connecting with the the Professional Puncher Integration Unit
3) Lift the Latch Plate (Front) up and lock it on the cover, and connect the Finisher and the
Professional Puncher Integration Unit by fitting the Positioning Pin of the Professional
Puncher Integration Unit into the hole on the Positioning Plate of the Finisher.
< Front side >
Latch Plate (Front)
ラッチ台(前)
< Rear side >
Positioning Pin
Hole
7-16
F-7-40
F-7-41
7-16