Grizzly T32730 Instructions page 3

Figure 7. Outboard extension shaft installed in
base.
— If installing tool rest arm, proceed to
Step 7.
— If installing outboard extension shaft, pro-
ceed to Step 8.
7. Install outboard extension shaft in tool rest
arm, then secure with adjustable handle (see
Figure 8).
Figure 8. Outboard extension shaft installed in
tool rest arm.
Model T32730 (Mfd. Since 01/22)
Outboard
Extension
Shaft
Adjustable
Handle
Outboard
Extension
Shaft
Adjustable
Handle
8. Loosen tool rest lock handle, then remove
tool rest.
9. Install tool rest in outboard extension shaft,
then secure with adjustable handle (see
Figures 9–10).
Figure 9. Tool rest installed in outboard
extension shaft.
Figure 10. Tool rest installed in outboard
extension shaft with arm.
Refer to Model G0733/G0766 Owner's Manual
for instructions on operating lathe.
If you need help with your new outboard turning
attachment, call Tech Support at: (570) 546-9663.
Tool Rest
Adjustable
Handle
Tool Rest
Adjustable
Handle
-3-