Functional Description; Installing Or Removing Battery Cartridge - Makita DLM463 Instruction Manual

2. Attach the mulching attachment while holding
down the lever, and then release the lever to lock the
mulching attachment.
Fig.10
► 1. Lever 2. Mulching attachment
FUNCTIONAL
DESCRIPTION
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the machine and the battery
cartridge firmly when installing or removing bat-
tery cartridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge
and a personal injury.
CAUTION:
Make sure that you lock the battery
cover before use. Otherwise, mud, dirt, or water may
cause damage to the product or the battery cartridge.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
NOTE: The tool does not work with only one battery
cartridge.
To install the battery cartridge;
1. Pull up the locking lever, and then open the battery
cover.
1
2
Fig.11
► 1. Battery cover 2. Locking lever
2.
Align the tongue on the battery cartridge with the
slot on the mower then slide the cartridge until it locks in
place with a little click.
Fig.12
► 1. Battery cartridge
3. Insert the lock key in the place shown in the figure
as far as it will go.
Fig.13
► 1. Lock key
4.
Close the battery cover and push it until it is
latched with the locking lever.
8 ENGLISH
1
2
1
1