Canon imageCLASS LBP122dw User Manual page 96

● Make sure the loaded paper does not exceed the load limit line (
may be misfeeds or a paper jam.
When Printing on the Back Side of Printed Paper (Manual 2-sided Printing)
Flatten the edge of the paper to remove any curls, and load the paper with the back (unprinted) side face up.
● You can use only paper printed with this machine.
● You cannot print on a side that has been previously printed on.
● If the printouts look faded, adjust the image quality.
5
Align the paper guides with the width and length of the paper.
Paper guides that are aligned but too loose or too tight can cause misfeeds or a paper jam.
6
Close the paper cover.
7
Raise the paper stopper.
8
Set the paper size and type.
Drawer(P. 95)
By default, the paper size and type of the paper drawer are set to LTR and Plain 2. When paper of a different
size or type is loaded, change the paper settings.
Basic Operations
[Manual Back Side Print (2-Sided Only)](P. 221)
Setting the Paper Size and Type for the Paper
89
). If it exceeds the load limit line, there