Reducing Power Consumption (Sleep Mode) - Canon imageCLASS LBP122dw User Manual

Reducing Power Consumption (Sleep Mode)

Sleep mode reduces power consumption by pausing certain operations inside the machine.
You cannot manually put the machine into sleep mode. If no operations are performed for a certain period of time, the
machine automatically enters sleep mode.
The display turns off in sleep mode.
◼
Exiting Sleep Mode
Press any key on the operation panel to exit sleep mode.
◼
Configuring Auto Sleep Time
Auto Sleep is a function that automatically places the machine into sleep mode if no operations are performed for a
certain period of time. You can specify the timing of Auto Sleep.
This section describes how to configure the settings using Remote UI from a computer.
On the operation panel, select [Menu] in the [Home] screen, and then select [Preferences] to configure the settings.
[Timer/Energy Settings](P. 201)
1
Log in to Remote UI.
2
On the Portal page of Remote UI, click [Settings/Registration].
Remote UI(P. 181)
3
Click [Timer Settings]
➠
The [Edit Timer Settings] screen is displayed.
4
Enter the time in [Auto Sleep Time].
* It is recommended to use the default setting to efficiently save power.
5
Click [OK].
➠
The settings are applied.
6
Log out from Remote UI.
● The machine does not enter sleep mode in the following cases:
- When the data indicator on the operation panel is lit or blinking
- When the [Menu] screen, a paper jam or other error message
display screen is displayed on the operation panel
Basic Operations
Starting Remote UI(P. 179)
[Edit].
76
Portal Page of
[Auto Sleep Time](P. 202)
Operation Panel(P. 10)
*1
, or Direct Connection SSID or network key
94RC-024