Connecting To A Wireless Lan By Entering A Pin Code (Wps Pin Code Mode) - Canon imageCLASS LBP122dw User Manual

Connecting to a Wireless LAN by Entering a PIN Code
(WPS PIN Code Mode)
When the wireless LAN router supports WPS PIN code mode, you can establish a connection by registering a PIN code
generated on the machine to the wireless LAN router. Use a computer to register the PIN code.
Administrator privileges are required to connect to a wireless LAN.
Required Preparations
● Access the wireless LAN router from a computer, and enable registration of a WPS PIN code.
* For details on how to register a WPS PIN code, see the manual of your wireless LAN router.
1
On the operation panel, select [Menu] in the [Home] screen and press
Screen(P. 81)
2
Press [Preferences
➠
The [Select Network] screen is displayed.
● If the login screen appears, enter the System Manager ID and PIN, and then press
ID and PIN(P. 4)
● If the message [Enable the wireless LAN?] appears, select [Yes] and press
● If the message [Cannot find the access point.] appears, press
3
Select [Other Connections] and press
4
Select [WPS PIN Code Mode] and press
➠
A PIN code is generated.
Once this screen is displayed, you must register the WPS PIN code to the wireless LAN router within 10
minutes.
5
Access the wireless LAN router from a computer, and register the WPS PIN code to
the router.
6
When [Connected.] appears on the operation panel, press
➠
When the machine is connected to the wireless LAN, [
Setting Up
[Network] [Wireless LAN Settings]
.
.
43
.
.
.
] appears on the [Home] screen.
94RC-018
. [Home]
.
. System Manager