Advertisement
Available languages
Available languages
Date Code Position (Fig. A)
The date code
14
, which also includes the year of manufacture,
is printed into the housing.
Example:
Year and Week of Manufacture
Description (Fig. A)
WARNING: Never modify the product or any part of it.
Damage or personal injury could result.
Left arm assembly
1
Right arm assembly
2
Left side support
3
Right side support
4
Horizontal stabilizer bar
5
Handle
6
Rotation lock
7
Shaft
8
Plain panel
9
Logo panel
10
Air vent panel
11
Chamber divider
12
Door base panel
13
Side cover
14
Add door
15
Time door
16
M5 threaded rod
17
M5 hooded nut
18
M5 flat washer
19
M6x35 round head screw
20
M6x55 round head screw
21
M6x18 flat head screw
22
M6 lock nut
23
M6 flat washer
24
M6 flat washer plus
25
M6 open lock washer
26
M6 nylon washer
27
M4x15 self tapping screw
28
29
Double sided 10 mm and 8 mm wrench
4 mm hex key
30
2022 XX XX
Intended Use
Your BLACK+DECKER, BDTCOM01 has been designed for
household, consumer use only. This barrel composter is
designed to mix typical green and brown compostables.
DO nOT let children come into contact with the tool. Supervision
is required when inexperienced operators use this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
•
This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS
WARNING: To reduce the risk of serious personal
injury, wear gloves and protective eye wear before
assembling, making any adjustments or removing/
installing attachments or accessories. Failure to follow
these warnings may result in serious personal injury or
property damage.
Assembling the Base (Fig. A–D)
1. Lay out the following components that are required for the
base assembly:
1
,
2
,
2. On the left arm assembly
holes
31
are facing outward on both arm assemblies
and
2
as shown in Fig. A.
3. On the right arm assembly
is facing inward on both arm assemblies
in Fig. A.
4. Ensure the lip
33
of side support
as shown in Fig. A.
5. Locate the horizontal stabilizer bar
right arm assemblies
1
6. Collect the following hardware components, four M6x35
round head screws
20
M6 open lock washers
7. In this order, install a M6 open lock washer
washer
24
onto each M6x35 round head screw
8. Insert the four M6x35 round head screws
the side supports
3
and
located on the sides of the arm assemblies
thread them into the horizontal stabilizer bar
in Fig. B.
9. Use the supplied 4mm hex key
M6x35 round head screws
nOTE: Do not fully tighten these screws. You will need
them to be somewhat loose for the composter barrel
installation later.
10. Collect the following hardware components, two M6x35
round head screws
20
M6 lock nuts
23
.
11. Pivot the two side support arms
install a M6 flat washer
3
,
4
and
5
.
1
ensure the three smaller
2
ensure the large single hole
1
and
2
3
and
4
faces outward
5
between the left and
and
2
as shown in Fig. B.
, four M6 flat washers
24
26
.
26
and a M6 flat
20
20
through
4
and into the screw holes
1
and
5
as shown
30
loosely tighten each
20
.
, two M6 flat washers
24
and two
35
and
36
upward and
onto a M6x35 round head
24
EnGLIsh
1
32
as shown
and four
.
34
2
and
21
Advertisement
