Technical Specifications; Optical Specifications; Table 14-2 Mu Connections-Cfm To Clip; Table 14-3 Cfm Operating Conditions - Cisco ONS 15200 Handbook

Technical Specifications

Table 14-1 SC Connections—CFM to SCU (continued)
SCU Type
A-0/B-100
Never use the CLIP B-side IN in an unprotected system.
Note
The MU cables are connected on the front panel of the CLIP module.
the MU connectors (labeled A, B, 90, 10). The unlabeled optical fiber jumper cable transmits the
dropped optical signal from the CFM to the CLIP module.
Table 14-2 MU Connections—CFM to CLIP
SCU Type
A-100 / B-0
A-90 / B-10
A-50 / B-50
A-10 / B-90
A-0 / B-100
14.2 Technical Specifications
This section provides optical, environmental, and mechanical specifications for the CFM. Electrical
specifications and default thresholds do not apply.

14.2.1 Optical Specifications

Table 14-3

Table 14-3 CFM Operating Conditions

Parameter
Channel spacing
Channel width
Table 14-4

Table 14-4 CFM Operating Frequencies

ITU Channel
23
25
27
Cisco ONS 15200 Module Handbook
14-2
CFM Type
100/0 + 0/100
CFM Type
100/0 + 0/100
90/10 + 10/90
50/50 + 50/50
90/10 + 10/90
100/0 + 0/100
specifies general operating conditions.
lists optical operating frequencies.
Frequency (THz)
192.3
192.5
192.7
A Input A Output
3 4
CLIP Input A
A
90
A
10
A
Nominal
200
0.40
Chapter 14 Collector Filter Module
B Input B Output
1 2
Table 14-2 explains how to connect
CLIP Input B
never used
10
B
90
never used
Unit
GHz
nm
Wavelength (nm)
1558.98
1557.36
1555.75
78-13767-01