Cisco Aironet 350 Series Hardware Installation Manual page 33

Basic Configuration
This chapter describes how to configure basic settings on your access point for the first time. The
contents of this chapter are similar to the instructions in the quick start guide that shipped with your
access point. You can configure all the settings described in this chapter using the CLI, but it might be
simplest to browse to the access point's web-browser interface to complete the initial configuration and
then use the CLI to enter additional settings for a more detailed configuration.
This chapter contains these sections:
Before You Start, page 3-2
•
Obtaining and Assigning an IP Address, page 3-2
•
Connecting to the Access Point Locally, page 3-3
•
Assigning Basic Settings, page 3-4
•
• Configuring Basic Security Settings, page 3-8
Finding the IP Address Using the CLI, page 3-12
•
• Assigning an IP Address Using the CLI, page 3-12
Using a Terminal Emulator to Access the CLI, page 3-13
•
• Using a Terminal Emulator to Access the CLI, page 3-13
OL-7467-01
D r a f t 1 - C I S C O C O N F I D E N T I A L
Hardware Installation Guide for Cisco Aironet 350 Series Access Points Running Cisco IOS Software
C H A P T E R
3
3-1