Advanced, Dependent Example; Add Serialization - Brady M710 User Manual

Advanced, Dependent Example

In a multi-sequence "linked" serialization (the Linked box is checked), the second set of values is
dependent on the first set. The second sequence holds its initial value until the first sequence
completes, after which it moves to the next value.
Example: Two sequences that increment dependently.

Add Serialization

To add serialization to labels:
1. Position the cursor on the label where you want the serialization to display.
2. Press SERIAL.
3. Enter the values for the first (or only) sequence.
•
•
•
4. For a simple sequence, tap OK and you are done. If you wish to add a second sequence,
continue. The remaining steps result in one complex sequence on the labels. To have the two
sequences appear in different places on the label, see
at different locations on the label:" on page
5. Select the Add Seq 2 box.
6. Under Sequence #2, enter the Start Value, End Value, and Increment.
7. If you want the values to increment dependently, as described in
Example" on page
8. Tap OK. The sequence is placed on the labels and the total number of labels is shown in the
upper right corner of the touchscreen.
Note: Linked serializations do not have to display at the same position on the label. They can be in
separate locations within the label. See below.
M710 User Manual
Start Value: 1
End Value: 10
Increment: 1
Produces: 1A, 2B, 3C, 4A, 5B, 6C, 7A, 8B, 9C, 10A, 1B,
2C, 3A, 4B, 5C ...
Sequence #1
Start Value: 1
End Value: 10
Increment: 1
Produces: 1A...10A, 1B...10B, 1C...10C
In the Start Value field, enter the start value of the sequence. If the start value is larger than
the end value, the series will decrement automatically.
In the End Value field, enter the end value of the sequence.
In the Increment field, enter the amount to increment each value in the sequence. For
example, a sequence beginning with 1 with an increment of 2 yields: 1, 3, 5, 7, 9, and so on.
56, select Linked.
Start Value: A
End Value: C
Increment: 1
Sequence #2
Start Value: A
End Value: C
Increment: 1
"To add multiple sequences, displayed
57.
Editing Labels on the Printer
Serialization (Sequential Data)
"Advanced, Dependent
56