Pause/Cut; Printer Configuration - Brady M710 User Manual

3. Press
4. For information on how to use the screen, see
settings on this screen are self-explanatory, but the following information may be useful.
•
•
5. Tap OK.
6. Press
next setting that you want to configure.

Pause/Cut

The Pause/Cut function allows you to remove a label from the printer before another label starts
printing.
To set pausing and cutting:
1. Press FN + SETUP.
2. Use the navigation keys to move through the menu until Pause/Cut is highlighted.
3. Use the up and down navigation keys to select the desired function.
•
•
•
4. Press

Printer Configuration

Use the Config menu to set the brightness, automatic shutdown, backfeed, and to clean the printer.
To configure the printer:
1. Press FN + SETUP.
2. Use the navigation keys to move through the menu until Config is highlighted.
3. Press
4. For information on how to use the screen, see
•
M710 User Manual
to accept the choice and display the time and date settings.
Display 24 Hour: If this is selected, hours are numbered 1-24. Clear this field to number the
hours 1-12 and use AM and PM.
PM: Not available if Display 24 Hour is selected. Clear this check box for AM; set it for PM.
to dismiss the menu. Alternatively, use the navigation keys to navigate to the
End of Label: The printer cuts after each label and then prints the next label.
End of Job: The printer prints all labels in a file and then cuts. The next job (file) prints.
Never: Always prints the next label or file in the queue without pausing. This is useful for
terminal block, patch panel, and 66-block labels.
to accept the choice.
to accept the choice and display the printer configuration settings.
Printer Name: (Optional.) Tap in the Printer Name box and use the keyboard to type a name
for the printer. When using the Brady Express Labels app, this name is shown when selecting a
printer.
"Settings Screens" on page
"Settings Screens" on page
Setup
Printer Settings
28. Most of the
28.
9