Errors - Hitachi IJ RX2 Technical Manual

5.9.4 Errors

(1) Errors during external communications
No.
Not all received print contents could be held in buffer because
1
its capacity was exceeded
2 Number of print items of received contents is more than 9.
Calendar or count character was included in print data call-up
3
transmission
No.
1 Text was transmitted together with another text
(2) Errors during printing
No.
The number of received contents in buffer was less than "Data
1
number at Fault".
Print start signal was received during print data switching
2
immediately after ACK was returned to "restart printing"
When "communication buffer fault" occurs, the window will be cleared, followed by standby
●
status.
(3) Error when status is changed
No.
Calendar characters or count characters were included to
1
existing print contents when restored to online.
Errors during print content transmission and print data call-up
Condition
Error when buffer is cleared
Condition
Errors during printing
Condition
Error when status is changed
Condition
Type of error
NAK is returned.
However, this will not cause any
external communication error.
External communication error 030
External communication error 027
Type of error
External communication error 002
Type of error
Fault "Communication Buffer
Fault"
Fault
"Invalid Data Change Timing"
Type of error
Confirmation message
"Communication buffer error"
●Communication Buffer 5-67