Honeywell Thor VM1 Instruction Manual page 3

Field replaceable front panel

10. Position the replacement front panel so the tab on the back of the front panel lines up with the slot on the Thor VM1. Be sure the two

wiring connectors are also aligned.

Slot

Thor VM1 with Front Panel Removed

11. Gently press the front panel into place.

12. Tighten the fourteen (14) captive M3 screws in the order shown in the figure for step 8 above. Use a #2 Phillips bit and torque the

screws to 6-7 inch pounds.

13. Reinstall the Thor VM1 in the dock. When the Thor VM1 is placed in the powered dock, the UPS battery automatically reconnects.

14. Press the Power button on the front of the Thor VM1.

15. The Thor VM1 automatically recognizes any change in keyboard configuration.

16. If the Thor VM1 has a Windows CE operating system and the defroster configuration has changed, use the Test button on the

Peripherals control panel to update the Thor VM1's configuration. Select Start > Settings > Control Panel > Peripherals and tap

the Test button.

17. The Thor VM1 is ready for use.

164007-0001 Rev C 1/13

Wiring Connector

Back of Thor VM1 Front Panel

Tab

Page 3