Advertisement
Quick Links
15D SERIES MINIATURE PUMP
O
Thank you for purchasing this Gast product. It is manufactured to the highest standards
using quality materials. Please follow all recommended maintenance, operational
and safety instructions and you will receive years of trouble free service.
PLEASE READ THIS MANUAL COMPLETELY BEFORE INSTALLING AND USING
Product Use Criteria:
• Pump only clean, dry air.
• Operate at 32ºF - 104ºF (0ºC - 40ºC).
• Protect unit from dirt & moisture.
• Do not pump flammable or explosive gases or
use in an atmosphere that contains such gases.
• Corrosive gases and particulate material will
damage unit. Water vapor, oil-based contaminants
or other liquids must be filtered out.
• Consult your Gast Distributor/Representative
before using at high altitudes.
• This pump is oil-less and requires NO lubrication.
• Units may be used for both pressure and vacuum.
®Registered Trademark/™Trademark of Gast Manufacturing Inc., Copyright © 2002 Gast Manufacturing Inc. All Rights Reserved.
& M
PERATION
WARNING
THIS PRODUCT. SAVE THIS MANUAL FOR FUTURE REFERENCE AND
KEEP IN THE VICINITY OF THE PRODUCT.
ISO 9001 & 14001 CERTIFIED
PART NO. 70 - 2400 G446PL (Rev K)
M
AINTENANCE
ANUAL
www.gastmfg.com
1
Advertisement
Related Manuals for Idex GAST 15D Series
Summary of Contents for Idex GAST 15D Series
- Page 1 15D SERIES MINIATURE PUMP PART NO. 70 - 2400 G446PL (Rev K) & M PERATION AINTENANCE ANUAL Thank you for purchasing this Gast product. It is manufactured to the highest standards using quality materials. Please follow all recommended maintenance, operational and safety instructions and you will receive years of trouble free service.
-
Page 2: Installation
Plumbing Your safety and the safety of others To prevent air flow restriction, use pipes and fittings of the is extremely important. same size or larger than the barbed or threaded ports. Note that the ports are not designed to support plumbing. We have provided many important safety messages in Accessories this manual and on your product. -
Page 3: Operation
Extension cords: OPERATION Use only a 3-wire extension cord that has a 3-blade grounding plug. Connect extension cord plug to a WARNING matching 3-slot receptacle. Do not use an adapter. Make sure your extension cord is in good condition. Check that the gage wire of the extension cord is the correct size wire to carry the current this product will Injury Hazard draw. -
Page 4: Shutdown Procedures
WARNING WARNING Injury Hazard Solvent Stream Product surfaces become very hot during operation, May contain solid or liquid material allow product surfaces to cool before handling. that can result in eye or skin damage. Air stream from product may contain solid or liquid Wear eye protection when using this product. -
Page 5: Parts & Ordering Information
EXPLODED PRODUCT VIEWS AC Model DC Model PARTS & ORDERING INFORMATION DC Series AC Series Parts listed are for stock Description 15D1150-201-1006 15D1150-101-1012 models. For specific OEM & Similar Models & Similar Models models, please consult the factory. Head screws SCR1032 SCR1032 Head... -
Page 6: Warranty
WARRANTY Gast finished products, when properly installed and operated under normal conditions of use, are warranted by Gast to be free from defects in material and workmanship for a period of twelve (12) months from the date of purchase from Gast or an authorized Gast Representative or Distributor.