Table of Contents
Advertisement
Quick Links
8R SERIES MINIATURE PUMP
O
Thank you for purchasing this Gast product. It is manufactured to the highest standards
using quality materials. Please follow all recommended maintenance, operational
and safety instructions and you will receive years of trouble free service.
PLEASE READ THIS MANUAL COMPLETELY BEFORE INSTALLING AND USING
Product Use Criteria:
• Pump only clean, dry air.
• Operate at 32ºF - 104ºF (0ºC - 40ºC).
• Protect unit from dirt & moisture.
• Do not pump flammable or explosive gases or
use in an atmosphere that contains such gases.
• Corrosive gases and particulate material will
damage unit. Water vapor, oil-based contaminants
or other liquids must be filtered out.
• Consult your Gast Distributor/Representative
before using at high altitudes.
• This pump is oil-less and requires NO lubrication.
• Units may be used for both pressure and vacuum.
®Registered Trademark/™Trademark of Gast Manufacturing Inc., Copyright © 2002 Gast Manufacturing Inc. All Rights Reserved.
& M
PERATION
WARNING
THIS PRODUCT. SAVE THIS MANUAL FOR FUTURE REFERENCE AND
KEEP IN THE VICINITY OF THE PRODUCT.
ISO 9001 & 14001 CERTIFIED
PART NO. 70 - 2550 G448PL (Rev B)
M
AINTENANCE
ANUAL
www.gastmfg.com
1
Advertisement
Table of Contents
Related Manuals for Idex Gast 8R Series
Summary of Contents for Idex Gast 8R Series
- Page 1 8R SERIES MINIATURE PUMP PART NO. 70 - 2550 G448PL (Rev B) & M PERATION AINTENANCE ANUAL Thank you for purchasing this Gast product. It is manufactured to the highest standards using quality materials. Please follow all recommended maintenance, operational and safety instructions and you will receive years of trouble free service.
-
Page 2: Installation
Your safety and the safety of others Accessories is extremely important. Install gauges in the lines to monitor performance. A relief valve can be installed at the inlet or outlet or both. Consult a Gast representative for performance We have provided many important safety messages in limitations. -
Page 3: Maintenance
Extension cords: MAINTENANCE Use only a 3-wire extension cord that has a 3-blade grounding plug. Connect extension cord plug to a WARNING matching 3-slot receptacle. Do not use an adapter. Make sure your extension cord is in good condition. Check that the gage wire of the extension cord is the correct size wire to carry the current this product will draw. - Page 4 Reassembly SERVICE KIT INSTALLATION 1. Place the valve in the valve plate pocket using the notch in both parts as an aid in orientation. 2. Assemble the head by aligning the two holes with the two pins in the valve plate. WARNING 3.
-
Page 5: Warranty
• • e i l • l f f • l f f • • • • i l e • • • • • • • • • t l i f • t l i f • l f f •... -
Page 6: Parts & Ordering Information
EXPLODED PRODUCT VIEW PARTS & ORDERING INFORMATION Parts listed are for stock models. For specific OEM models, please consult the factory. Description Quantity 8R Neoprene Valve 8R EPDM Valve & Similar Models & Similar Models Head screws SCR1014 SCR1014 When corresponding or ordering parts, Head HDC1005 HDC1005...