Installing And Setting Up Firstgear-User Installation; Figure 4-1. Firstgear Introductory Window - NETGEAR PS104 Installation And Reference Manual

Installation and Reference for the Model PS104/PS105/PS110 Print Server
Choose this option, User Installation, to be able to print to the print server.
Note: Before proceeding with these instructions, be sure to assign a name to your
workgroup on your PC. Installation and setup of the NETGEAR software is required on
each PC needing access to the printers that will be attached to the print server.
NETGEAR strongly recommends that you exit all Windows programs before running
the Setup program.
Installing and Setting Up FirstGear—User Installation
To install the NETGEAR print server software for user installation:
Turn on the power to your PC.
1.
Insert the NETGEAR Resource CD-ROM.
2.
The NETGEAR window briefly opens and the FirstGear Introductory window, as illustrated in
Figure 4-1, opens.
If it does not, click on Start > Run and then type in "Install.exe" at the prompt (for example,
"D:Install.exe") to start the installation process.
Figure 4-1. FirstGear Introductory Window
4-2 Microsoft Windows NT Printing