NetWare Remote Printer (RPRINTER) Mode
In the NetWare RPRINTER mode, QUICKSET uses these settings:
•
Ethernet 802.2 frame type
Set to Enable
•
Ethernet 802.3 frame type
Set to Enable
•
Ethernet SNAP frame type
Set to Enable
•
Ethernet II frame type: Enable
•
Set attached NetWare Print Server as the specified server
•
Set NetWare Operation Mode: Remote Printer Mode
•
Set the print server name as specified in the parameter list
The QUICKSET program configures all of the printer ports on the printer to service the same
NetWare print server. If you want to configure the printer ports to service different NetWare print
servers, refer to
"Attaching to More Than One NetWare Print
In the Novell RPRINTER mode, use these QUICKSET commands:
•
For Binary-based file server
QUICKSET Name R (UN=P) (/Q1=W) (/Q2=X) (/FS=F)
•
For NDS Network
QUICKSET Name R (/UN=P) (/Q1=W) (/Q2=X)
Using Advanced Management Tools
Installation and Reference for the Model PS104/PS105/PS110 Print Server
Server" on
page
5-21.
7-23