Table 3-1. Fields And Descriptions For Tcp/Ip Configuration - NETGEAR PS104 Installation And Reference Manual

Netgear ps104 print server: install guide
Table of Contents

Advertisement

Installation and Reference for the Model PS104/PS105/PS110 Print Server
Select Enable or Disable to enable or disable DHCP.
5.
If DHCP is enabled, the print server can be set up to obtain its IP address from a DHCP
(Dynamic Host Configuration Protocol) server or can be manually assigned an IP address at
this menu tab.
If DHCP is disabled, be sure that the IP address assigned to the device is not already in use
when assigning the IP address manually.
For a private TCP/IP network, you can use the IETP-designated private addresses (for
example, 192.168.X.X or 10.X.X.X). For more information about IP addresses, refer to
Appendix B, "Understanding IP
Type the subnet mask and gateway address (if DHCP is disabled) or proceed to step 7.
6.
Click on the Save To Device button to download the new print server configuration.
7.
Click on Return to Main Menu to exit the Advanced Configuration window.
8.
Click on Exit on the main menu.
9.
Table 3-1.
Fields and Descriptions for TCP/IP Configuration
Field
Description
DHCP
This option allows you to enable or disable the print server's ability to get its IP address from
a DHCP (Dynamic Host Configuration Protocol) server. When disabled, you can provide a
fixed IP address in the IP address, Gateway address, and Subnet Mask fields (listed in this
table).
IP Address
This IP address is assigned to the print server. If you have a private LAN and do not plan to
connect to the TCP/IP-based Internet, NETGEAR recommends that you use an address
from the IETP-designated private addresses (for example, 192.168.x.x or 10.x.x.x).
Gateway
This IP address is what the print server uses for stations with IP addresses not reachable on
Address
your local LAN.
Subnet Mask
This subnet mask defines the range of addresses that are reachable on your local LAN.
Your print server is now set up to use the TCP/IP protocol for networking. If you enable DHCP,
you must prepare the DHCP server to receive a DHCP query from the print server. Then reset the
print server so it can then obtain an IP address from the DHCP server.
If you run into any difficulty with the static IP Setup, there is the possibility that you inadvertently
disabled the DHCP protocol and/or assigned a wrong subnet IP address. Proceed to
"IP
Setup," for more information to help you force a static IP address to the print server.
3-28
Addresses."
Microsoft Windows 95 and Windows 98 Printing
Appendix E,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ps105Ps110

Table of Contents