Setting Up Your Pc To Recognize The Print Server; Installing And Setting Up Firstgear-Diskette Option - NETGEAR PS104 Installation And Reference Manual

Setting Up Your PC to Recognize the Print Server

Refer to "Setting Up Your PC to Recognize the Print
Installing and Setting Up FirstGear—Diskette Option
Use this option if your system does not have a CD-ROM drive.
To install the FirstGear software with a diskette:
Insert a blank diskette into Drive A, and click on OK, as illustrated in
1.
The diskette installation will not work in any other drive but drive A, and you must also use a
high-density disk.
Figure 3-25. Install From Disk Window
Refer to "Installing and Setting Up FirstGear—User
2.
and Setting Up FirstGear—Admin Installation
and setup process.
For more information about the advanced setup features for the NETGEAR print server, refer to
Chapter 7, "Using Advanced Management
Microsoft Windows 95 and Windows 98 Printing
Installation and Reference for the Model PS104/PS105/PS110 Print Server
Tools."
Server" on page 3-8
Installation" on
on page 3-17 to continue with the installation
for instructions.
Figure 3-25.
page 3-2 or "Installing
3-23