Accessing Your Router After Installation - NETGEAR WNR2000 Setup Manual

The Smart Wizard guides you through installing your router, connecting your router to the
Internet, configuring your wireless network settings, and selecting the optimum security
protection for your network. If you choose not to select a security option during installation,
you can always access the router's user interface later to select a security option (see
"Configuring Your Wireless Network" on page
To ensure optimum performance of your high-speed wireless router, the
wireless adapter card for each computer in your network should support the
same technology as your router. For more information, see the online User
Manual.
You are now connected to the Internet.
Figure 6
To set up additional wireless computers in your network to access the router and connect to the
Internet, see "Configuring Your Wireless Network" on page

Accessing Your Router After Installation

The Smart Wizard only appears when you first install the router or when the router is in its factory
default state (for example, if you have reset the router to its default factory settings). If you want to
change the settings after installing and configuring your router using the Smart Wizard, you must
open a browser window and log in to the router. You will also be prompted to check for new router
firmware. For more information, see
10
21).
"Configuring Your Wireless Network" on page
Installing Your Router Using the Smart Wizard
21.
21.